DODGE F4B-SCMED-208 flange bearing 4 holes

DODGE F4B-SCMED-208 is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SCMED-208 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCED series 4-bolt flange bearing with insert bearing is an assembled unit that combines a cast housing with an insert ball bearing, ready to mount on a flat surface. It is used to support rotating shafts in equipment where rigid, centered fastening is needed, such as belt conveyors, mixers or fans. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, and quotes it on WhatsApp with the complete part number.

The designation of these bearings is read in parts. The letters F and B indicate the flange type and the mounting; the number that follows —4 in the examples— indicates the number of mounting holes. The SCMED block corresponds to the insert and housing series, and the final numeric suffix identifies the bore size of the bearing: that is why part numbers with different numeric suffixes coexist. Each suffix refers to a different shaft diameter within the same construction family.

In Argentine industry these bearings appear in belt conveyors, bucket elevators, mills, screens and process equipment. They are also found in food plants, cement plants, tanneries and metalworking facilities, where the four-bolt flange allows firm alignment on sheet metal or structure. Being a sealed and pre-lubricated unit, it simplifies maintenance in areas with dust, humidity or frequent washdowns.

To choose correctly, take into account the shaft diameter, the type of load —radial, axial or combined— and the environmental conditions. The insert's sealing defines how much contamination it tolerates: in environments with water or particles, tighter protection is advisable. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check that the shaft turns without effort. The factory lubrication is enough for start-up; afterwards follow the equipment's greasing plan.

Insert-bearing pillow blocks and flanges are interchanged between brands by their dimensional configuration: square flange, hole spacing and shaft diameter. Many lines from different manufacturers share those dimensions, although they change the insert locking system or the type of sealing. The most practical approach is to compare those dimensions and the service conditions. At MR Accesorios Industriales we will indicate the compatible alternative within what we sell.

If you already have the part number of the bearing you use —for example F4B-SCMED-107 or F4B-SCMED-115—, send it on WhatsApp along with a photo of the mounting and the shaft dimensions. With that we will quote the DODGE reference or the equivalent option that best fits your equipment. You can also ask us about other series of split plummer block housings, 2-bolt and 4-bolt flanges and insert bearings that we sell in Buenos Aires, Argentina.