DODGE F4B-SCM-300-NL flange bearing 4 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SC
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F4B-SCM-300-NL is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SCM-300-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE SC series Y-bearing unit with insert bearing is a 4-bolt flange mounted bearing unit, designed to secure rotating shafts to flat structures and absorb moderate radial and axial loads. It is used in power transmission equipment where a rigid, aligned support is required, with the advantage of simple mounting and a seal that retains lubricant and blocks dust. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.
The SC series designation is read in blocks: F4B indicates the 4-bolt flange type, SC identifies the insert bearing series, and the three-digit number indicates the shaft diameter in inches. The suffix NL corresponds to the version without a locking collar, while M in SCM refers to the insert with specific series characteristics. These codes let you order the exact replacement without ambiguity.
In Argentine industry, these bearing units appear in belt conveyors, mixers, mills, centrifugal pumps, fans and packaging lines. Their 4-bolt flange makes installation on sheet metal or profile structures easy, and the insert bearing accommodates slight misalignments typical of equipment with long shafts. They are common in food, chemical and aggregate plants, where a robust support with simple maintenance is required.
To select the bearing unit, check the shaft diameter, the mounting type (flange or pillow block) and the environmental conditions. The insert seal defines protection against dust and moisture: in dirty environments a reinforced seal is advisable. Mounting requires cleaning the seat, aligning the holes and tightening the bolts in a cross pattern. Lubrication must be the one indicated by the manufacturer, and internal clearance is not adjusted in this type of unit.
DODGE SC series bearing units are interchangeable with other brands that use the same flange standard and shaft diameter, as long as the hole spacing and center height match. When requesting a quote, it is advisable to provide the full part number and the shaft and flange dimensions so a compatible alternative can be offered. MR Accesorios Industriales advises you to find the right option.
If you need to replace a Y-bearing unit with insert bearing, send the part number by WhatsApp to MR Accesorios Industriales. We will quote the DODGE reference that best suits your equipment. We can also help you interpret the designation if you have doubts about the suffix or the diameter. Write to us and we will reply shortly.
Dimensions
- Número de producto
- 126539
Frequently Asked Questions
- What does the NL suffix mean on DODGE SC series bearing units?
- The NL suffix identifies the version without a locking collar. This simplifies mounting and reduces the number of parts, although the fit to the shaft is achieved by interference or set screws depending on the insert design.
- How do I choose the correct diameter for my shaft?
- The diameter comes from the three-digit number in the code: each number corresponds to a shaft size in inches. Measure the shaft with a caliper and compare it with the SC series table.
- Can I replace a bearing unit from another brand with a DODGE SC series unit?
- Yes, if the shaft diameter, the flange hole spacing and the center height match. Send the dimensions or the original part number by WhatsApp and we will tell you the available equivalent.