Flange bearing 4 holes DODGE F4B-SCFS-25M-SHFS

DODGE F4B-SCFS-25M-SHFS is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCFS-25M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCFS series Y-bearing with insert bearing is a 4-bolt flange mounted unit, designed to support rotating shafts on flat structures. The flange allows mounting the unit perpendicular to the shaft, with a symmetrical hole pattern that distributes the load over the sheet metal or frame. It is used in equipment where the shaft must be axially contained and alignment is resolved in the insert itself.

The SCFS series designation is read in blocks. The F4B prefix indicates the 4-bolt flange configuration; SCFS identifies the housing family and the insert type; the middle number, as in F4B-SCFS-20M-SHFS or F4B-SCFS-50M-SHFS, corresponds to the shaft diameter for which the unit is assembled. The M suffix and the SHFS ending distinguish sealing and insert fastening variants. With that data the complete unit is identified.

These units appear in material handling, belts, elevators, mixers, blowers and process lines. In Argentine plants they are seen in milling equipment, solids feeding, effluent treatment and grain handling, where the shaft works supported on sheet metal or profile structures. The 4-bolt flange solves mounting on flat faces and allows removing the unit without disassembling the entire shaft.

To select correctly, take into account the shaft diameter, the type of load and the direction of the force on the flange. Check the insert sealing according to the environment: dust, water or frequent washing require different protection. During mounting, support the flange on a clean, flat surface, tighten the four bolts in a cross pattern and verify that the shaft turns without effort. Lubricate the insert according to the duty cycle and check alignment before starting the equipment.

Across brands, flange mounted units are interchanged by shaft diameter and hole spacing, not by the commercial code. Two references from different manufacturers may share flange dimensions and be equivalent, but the sealing, internal clearance or shaft fastening type may differ. If you need to replace a unit, send us the complete code and the flange dimensions: we will indicate the compatible alternative.

If you have the unit code, the shaft diameter or a photo of the flange, send it by WhatsApp to MR Accesorios Industriales. We will quote the DODGE SCFS series reference you need and, if you are looking for another variant in the line, we will indicate the option that best suits your equipment. More than 80 years supporting Argentine industry from Buenos Aires.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.