Flange bearing 4 holes DODGE F4B-SCEZ-50M-PCR

DODGE F4B-SCEZ-50M-PCR is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-50M-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange Y-bearing with insert is a mounted unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is bolted onto a flat surface and supports the shaft in applications where firm mounting and simple alignment are required. MR Accesorios Industriales supplies the DODGE SCEZ series, one of the most widely used mounted bearing lines in power transmission equipment.

The SCEZ series designation is read in blocks. In the examples F4B-SCEZ-20M-PCR, F4B-SCEZ-25M-PCR or F4B-SCEZ-50M-PCR, the prefix F4B identifies the 4-bolt flange; SCEZ is the insert series, with its geometry and sealing system; the middle number indicates the shaft size; and the suffix PCR defines the housing and mounting variant. Knowing each block allows you to order the correct replacement without relying on a photo or a measurement taken with the machine stopped.

These brackets appear in belt conveyors, bucket elevators, mixers, exhaust fans, packaging belts and process lines. In the Argentine market they are found in food plants, cement plants, meatpacking plants, tanneries and aggregate facilities, where the environment has dust, humidity or frequent washdowns. The 4-bolt flange allows mounting on sheet metal or profile structure, and the insert bearing absorbs minor misalignments without requiring precision machining of the bracket.

To choose well, take into account the shaft diameter, the load type and the environment. The insert sealing defines how much contamination the unit tolerates: in areas with water or fine dust, the variant with greater protection is preferable. Check that the flange seats flat, that the four bolts tighten evenly and that the shaft enters without blows. Lubrication comes from the factory, but in service it should be checked according to running hours and working temperature. Careful alignment during mounting extends the life of the insert.

Between brands, mounted flange brackets are interchanged by shaft number and housing type, not by the complete part number. Equivalent series from other manufacturers may differ in center height, hole diameter or sealing, so interchangeability is confirmed by comparing those dimensions. If the equipment has a DODGE SCEZ unit, the most direct approach is to repeat the series and shaft size. If the original brand does not appear, the compatible alternative with the same mounting dimensions is sought.

If you need to replace a flange bracket, send the part number on the housing or on the part via WhatsApp, for example F4B-SCEZ-30M-PCR, and we will quote it. If the part number is not legible, send the shaft diameter and the distance between the flange holes, and we will indicate the compatible alternative. MR Accesorios Industriales works with the DODGE mounted bearing line and with the sizes used in Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.