DODGE F4B-SCEZ-35M-SHCR flange bearing 4 holes

DODGE F4B-SCEZ-35M-SHCR is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SCEZ-35M-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCEZ series 4-bolt flange Y-bearing with insert is a mounted unit that combines a cast iron housing with a self-aligning, sealed ball bearing insert. It is used to support rotating shafts in equipment where firm front mounting and some tolerance to misalignment are required. MR Accesorios Industriales sells this line for plants, workshops and maintenance operations in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks: F4B indicates a 4-bolt flange, SCEZ identifies the flange bearing housing family with insert, and the number that follows corresponds to the shaft diameter in millimeters. The SHCR suffix indicates the sealing and locking configuration of the insert. Thus, an F4B-SCEZ-30M-SHCR is a flange bearing for a 30 mm shaft with the sealed insert of the series.

These bearings appear in belt conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In Argentine industry they are found in food, cement, paper and aggregate processing plants, where front mounting on sheet metal or structure allows the shaft to be aligned with the drive equipment. The 4-bolt flange distributes the load and simplifies anchoring on profile frames or welded plates.

To choose the bearing, start with the shaft diameter and the type of load: predominantly radial in belt or chain drives, and some axial load in propellers or screw conveyors. Check the sealing according to the environment: dust, water or frequent washing require inserts with reinforced seals. During mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and verify that the shaft turns without effort. The insert lubrication comes from the factory; in service, follow the equipment's greasing plan.

Insert bearings from different brands share standardized flange dimensions and shaft diameters, which allows units to be interchanged between manufacturers when the hole arrangement and the insert locking system match. To replace a DODGE SCEZ with another brand, compare the shaft diameter, the distance between holes and the type of sealing. If you need an alternative, at MR Accesorios Industriales we can indicate the compatible option.

If you already have the part number of the bearing you are using, send it by WhatsApp to MR Accesorios Industriales and we will quote it shortly. You can also write to us with the shaft diameter and a photo of the flange if you need to identify the variant. We work with the DODGE line and with equivalent alternatives so that your equipment keeps running.