Flange bearing 4 holes DODGE F4B-SCEZ-30M-SHCR

DODGE F4B-SCEZ-30M-SHCR is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-30M-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ series Y-bearing insert flange unit is a 4-bolt mounted assembly that combines a cast iron housing with a self-aligning, sealed ball bearing. It is used to support rotating shafts in equipment requiring firm front mounting and some tolerance to misalignment. MR Accesorios Industriales carries this line as an official brand for plants, workshops and maintenance in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks: F4B indicates a 4-bolt flange, SCEZ identifies the housing family with insert bearing, and the number that follows —20M, 25M, 30M, 35M, 40M or 50M— corresponds to the shaft diameter in millimeters. The suffix SHCR indicates the sealing and locking configuration of the insert. Thus, an F4B-SCEZ-30M-SHCR is a flange housing for a 30 mm shaft with the sealed insert of the series.

These housings appear in belt conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In Argentine industry they are found in food, cement, paper and aggregate processing plants, where front mounting on sheet metal or structure allows the shaft to be aligned with the drive equipment. The 4-bolt flange distributes the load and simplifies anchoring on profile frames or welded plates.

To choose the housing, start from the shaft diameter and the type of load: predominantly radial in belt or chain drives, and some axial load in propellers or screw conveyors. Check the sealing according to the environment: dust, water or frequent washing require inserts with a reinforced seal. During mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check that the shaft turns without effort. The insert lubrication comes from the factory; in service, follow the equipment's greasing plan.

Insert bearing housings from different brands share standardized flange dimensions and shaft diameters, which allows units to be interchanged between manufacturers when the hole arrangement and the insert locking system match. To replace a DODGE SCEZ with another brand, compare the shaft diameter, the distance between holes and the seal type. If you need an alternative, at MR Accesorios Industriales we indicate the compatible option.

If you already have the part number of the housing you are using, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also write to us with the shaft diameter and a photo of the flange if you need to identify the variant. We work with the DODGE line and with equivalent alternatives so that your equipment keeps running.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.