Flange bearing 4 holes DODGE F4B-SCEZ-107-SH

DODGE F4B-SCEZ-107-SH is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-107-SH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bracket with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and ready to fasten. It is used to support rotating shafts on flat structures, where the flange distributes the load over four points and keeps the shaft perpendicular to the mounting surface. MR Accesorios Industriales supplies the DODGE SCEZ series, an official brand that MR carries.

The series designation is read in blocks. The letters SCEZ identify the flange bracket family with insert bearing and reinforced sealing; the F4B prefix indicates the 4-bolt flange housing. The final number indicates the shaft diameter: three-digit codes such as F4B-SCEZ-012-SH or F4B-SCEZ-014-SH correspond to inch measurements, while those of the type F4B-SCEZ-100-SH, F4B-SCEZ-102-SH and F4B-SCEZ-104-SH follow the numbering for equivalent metric shafts. The SH suffix distinguishes the insert and sealing variant.

These brackets appear in belt conveyors, bucket elevators, mixers, screens, fans and packaging lines. In the Argentine market they are found in food plants, cement plants, cold storage facilities, tanneries and agricultural establishments, where frequent washdowns and dust demand a seal that retains grease and blocks the entry of water and particles. The 4-bolt flange allows them to be mounted on folded sheet metal, profiles or heavy-gauge sheet frames without machining the surface.

To choose correctly, check the shaft diameter and type, the load direction and the working environment. In applications with moisture or washdown, the reinforced sealing variant is advisable; on shafts rotating at higher speed, check the internal clearance and the insert locking type. During assembly, place the flange on a flat surface, tighten the four bolts in a cross pattern and verify shaft alignment before start-up. Lubricate according to the duty cycle and check the seal periodically.

Flange mounted units are interchanged between manufacturers by shaft number and housing type, not by catalog code. If you need to replace an existing unit, compare the shaft diameter, the flange hole spacing and the insert locking type. MR Accesorios Industriales can indicate the compatible alternative within the SCEZ series or other equivalent lines, and if the bracket is not in the catalog, we manufacture it to order.

Send by WhatsApp the complete part number shown on the nameplate or on the bracket box, for example F4B-SCEZ-015-SH or F4B-SCEZ-106-SH, and we will quote it promptly. If you cannot find the exact part number, write to us with the shaft diameter and a photo of the assembly: we will indicate the alternative that best suits your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.