DODGE F4B-SCEZ-104S-SHCR flange bearing 4 holes

DODGE F4B-SCEZ-104S-SHCR is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-SCEZ-104S-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange Y-bearing housing with DODGE SCEZ insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with four bolts. It is used to guide rotating shafts in equipment where rigid, centered support is required, with the advantage that the bearing comes already housed and lubricated. It is a common solution in light and medium-duty drives.

The SCEZ series designation is read in blocks: the letter F indicates the 4-bolt flange, the number that follows defines the shaft diameter, and the letters B, SCEZ and the suffixes S and SHCR identify the housing type, the insert and its sealing features. For example, F4B-SCEZ-104S-SHCR corresponds to a 4-bolt flange with an SCEZ series insert and reinforced sealing. Each block of the reference provides specific information for selecting the correct unit.

In Argentine industry, these housings appear in belt conveyors, mixers, blowers, centrifugal pumps and packaging lines. They are also found in milling equipment, sorting belts and machines for the food industry, where the 4-bolt flange allows firm fastening onto sheet metal or a steel structure. Their compact format and the possibility of mounting a through shaft make them versatile for different arrangements.

To choose well, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert's sealing defines the protection against dust, water or cleaning agents. During mounting, verify that the support surface is flat and clean, align the holes and tighten the bolts in a cross pattern. The insert's lubrication is usually permanent, but it is advisable to check the condition of the sealing and the shaft alignment.

Cross-brand equivalences are handled by series and by shaft dimensions: a 4-bolt flange housing with an insert from one brand can be replaced by another with similar dimensions and mounting type, as long as the shaft diameter, the hole spacing and the center height match. It is not enough for the reference to be similar: the flange geometry and the insert type must be compared.

If you need to replace a flange Y-bearing housing or add a variant to your equipment, send the full part number by WhatsApp to MR Accesorios Industriales. We will quote the DODGE reference you are looking for or indicate the alternative compatible with your application. At MR Accesorios Industriales we know the details that make a mounting work.