Flange bearing 4 holes DODGE F4B-SCEZ-102-PCR

DODGE F4B-SCEZ-102-PCR is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-102-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange housing with DODGE SCEZ insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface with four bolts. It is used to guide rotating shafts in equipment where rigid support and simple alignment are required. MR Accesorios Industriales supplies this line as an official brand for plants and workshops in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks: the F4B prefix indicates the 4-bolt flange type; SCEZ identifies the insert bearing series, with sealing and features specific to the line; the number that follows — as in F4B-SCEZ-012-PCR or F4B-SCEZ-104-PCR — indicates the shaft size, and the PCR suffix distinguishes the mounting variant. These examples show how only the size code changes within the same family. Send the complete part number to identify the exact part.

This type of housing appears in conveyors, mixers, blowers, centrifugal pumps, packaging belts and process lines in general. In Argentina it is found in food, chemical and cement plants and in maintenance workshops that replace worn units. The 4-bolt flange allows mounting on sheet metal or steel structure with a symmetrical bolt pattern, which simplifies leveling and reduces intervention time.

To select the housing, check the shaft diameter and the type of load: radial, axial or combined. The insert seal defines protection against dust, water or environments with vapors; in wet applications a variant with an additional seal is advisable. During mounting, tighten the bolts in pairs and in a cross pattern to avoid deforming the flange, and check alignment with the drive shaft. Lubricate the insert with grease compatible with the seal, without overfilling the cavity.

Insert bearing housings from different brands are often interchangeable if the hole pattern, shaft diameter and fixing type match. It is not enough for the series to be similar: the center height, hole diameter and insert locking system must be compared. If the original unit is not available, an equivalent alternative can be evaluated while maintaining the same mounting and load conditions.

If you need to replace a DODGE SCEZ series housing, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote the exact reference or indicate the compatible alternative. We can also review the mounting if you send us a photo of the flange and the shaft. With more than 80 years in the field, we support workshops and plants in Buenos Aires, Argentina, with direct technical advice.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.