Flange bearing 4 holes DODGE F4B-SCAH-104S

DODGE F4B-SCAH-104S is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCAH-104S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCAH series Y-bearing insert unit is a 4-bolt flange mounted bearing, designed to support rotating shafts and absorb radial loads in power transmission equipment. The flange is fastened to the frame or structure with four bolts, and the insert with a spherical outer ring compensates for minor misalignment inherent to mounting. It is used in conveyors, agitators, fans and process machinery where a compact, easy-to-mount and easy-to-replace unit is required.

The SCAH series designation is read in blocks: the letters identify the unit family and the housing type, and the numbers appearing in each reference, as in F4B-SCAH-104S, indicate the shaft diameter and the sealing or locking variant. The prefix F4B corresponds to the 4-bolt flange; SCAH defines the insert series; and the final suffix distinguishes the shaft diameter and the seal type. With the full part number you order the exact unit.

In Argentine industry these units appear in belt and chain conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. They are also found in water treatment equipment, food plants and maintenance workshops replacing worn units. Being a 4-bolt flange, the unit is bolted to a flat face and remains accessible for greasing and visual inspection, which is very practical in equipment running many hours per day.

To select the right unit, take into account the shaft diameter, the load type and the mounting position. Check that the mounting face is clean and flat, and that the four bolts are tightened evenly so as not to deform the flange. The insert with a spherical outer ring allows slight misalignment, but the shaft should be aligned as far as possible. Check the sealing according to the environment: dust, water or frequent washdowns call for tighter seals. Lubrication is done through the insert channel and must be renewed according to the duty cycle.

As for equivalents, 4-bolt flange units with inserts are interchangeable between brands when the shaft diameter, the distance between holes, the flange diameter and the center height match. It is not enough for the series to be similar: those dimensions and the insert locking type on the shaft must be compared. If the original part number is not available, MR Accesorios Industriales will indicate the compatible alternative with the same mounting dimensions.

If you need to replace a Y-bearing insert unit, send the full part number on WhatsApp, for example F4B-SCAH-104S, or the flange and shaft dimensions. At MR Accesorios Industriales we will quote it and indicate the alternative that best suits your equipment, with a reply shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.