Flange bearing 4 holes DODGE F4B-SCAH-102

DODGE F4B-SCAH-102 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCAH-102 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCAH 4-bolt flange bearing unit is a mounted assembly that combines a flange housing with an insert ball bearing. It is used to support rotating shafts on flat structures, with the flange bolted to the surface. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, and advises you on choosing the correct part number for your application.

The SCAH series designation is read in blocks: the letter F indicates the flange housing type, the number that follows defines the size and the letters SCAH identify the construction variant within the family. For example, F4B-SCAH-012 and F4B-SCAH-104 share the same series but change the numeric suffix, which corresponds to the shaft diameter for which the insert is machined. That suffix is the reference you need to send us to quote the exact assembly.

These housings are used in belt conveyors, bucket elevators, mixers, fans, centrifugal pumps and process lines in food, chemical and aggregate plants. In Argentina you will find them in milling plants, packaging plants, water treatment plants and material handling equipment. The 4-bolt flange allows mounting on sheet metal or profile structures, with the shaft perpendicular to the mounting surface, which simplifies initial alignment and assembly replacement.

To select the housing, start from the shaft diameter and the type of load: radial, axial or combined. Check that the flange has the right number of holes and bolt diameter for your structure. The insert is factory-lubricated; in service, check the sealing and relubricate according to temperature, dust or moisture conditions. When mounting, place the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns freely before start-up.

DODGE is a brand supplied by MR Accesorios Industriales, and its mounted housings have dimensional equivalents with other insert bearing lines on the market. If you need to replace an existing assembly, the most practical approach is to compare the shaft diameter, the distance between flange holes and the overall height of the housing. With this data we will indicate the compatible alternative within the SCAH series or other families we supply.

If you already have the housing part number, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. If you do not have it at hand, send us the shaft diameter and a photo of the mounting: we will help you identify the reference you need. We can also advise you on mounting, lubrication and insert replacement so that the equipment keeps running without unnecessary downtime.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.