Flange bearing 4 holes DODGE F4B-SC-110L-NL

DODGE F4B-SC-110L-NL is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SC-110L-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange Y-bearing insert unit is a mounted unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts on flat structures, where firm fixing and simple alignment are required. The DODGE SC series is one of the most widespread in transmission and conveying equipment.

The designation of these housings is read in blocks. The initial letters indicate the type of housing and the number of fixing holes; the number that follows the hyphen identifies the shaft size according to the SC series. The suffix L indicates the type of sealing, and NL indicates that the insert does not have a locking collar. Thus, F4B-SC-008L-NL, F4B-SC-010L-NL and F4B-SC-110L-NL are three different sizes of the same family. To choose, the key data is the shaft diameter and the type of fixing that your machine accepts.

These housings appear in belt conveyors, bucket elevators, mixers, screens, mills and packaging lines. In Argentina they are found in food, cement, mining, paper and agricultural plants, especially in equipment that works with dust, humidity or frequent washdowns. The 4-bolt flange allows mounting on sheet metal or profile structures, with the shaft perpendicular to the support plane. It is a robust solution for shafts that rotate at moderate speeds and receive combined radial and axial loads.

When selecting, verify the shaft diameter, the hole spacing of the flange and the orientation of the housing. The L sealing protects against dust and splashes; if the environment is very dirty or there is pressure washing, additional protection should be evaluated. The insert comes lubricated from the factory and, in general, requires no maintenance until replacement. During assembly, rest the flange on a flat surface, tighten the screws in a cross pattern and verify that the shaft is aligned with the other support to avoid parasitic loads.

DODGE is a reference brand in mounted housings, and its sizes are usually interchangeable with those of other brands under equivalent standards. Interchangeability depends on the shaft diameter, the type of fixing and the flange dimensions; it is not enough for the code to be similar. If you need to replace an existing housing, send us the complete code or the shaft and flange dimensions. At MR Accesorios Industriales we will quote the DODGE reference or indicate the compatible alternative.

MR Accesorios Industriales supplies DODGE as a brand. If you have doubts about which size corresponds to your equipment, write to us on WhatsApp with the code F4B-SC-008L-NL, F4B-SC-010L-NL, F4B-SC-110L-NL or the one shown on your machine. We will reply promptly with the quote and the technical information you need to mount without errors.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.