Flange bearing 4 holes DODGE F4B-SC-104S-NL

DODGE F4B-SC-104S-NL is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SC-104S-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC series Y-bearing flange unit is a 4-bolt flange mounted bearing that combines a ball insert with a cast iron housing. It is used to support rotating shafts in equipment requiring rigid fixing and simple alignment. MR Accesorios Industriales supplies this line as a brand for industrial plants in Buenos Aires and the rest of Argentina.

The SC series designation is read in blocks: the letter F indicates the flange type, the number that follows defines the shaft diameter and the suffix B indicates the mounting variant. In the example F4B-SC-104S-NL, the 4 corresponds to the number of flange holes, SC identifies the insert series and 104S the nominal shaft diameter. The suffix NL indicates a specific sealing or fixing configuration. This code unambiguously identifies the housing your equipment needs.

These housings are used in belt conveyors, mixers, fans, centrifugal pumps and process lines in food, chemical and aggregate treatment plants. In Argentina they are common in sugar mills, balanced feed plants and metallurgical facilities where firm support on sheet metal or structure is required. The 4-bolt flange allows the housing to be mounted directly on a flat surface and to absorb moderate radial and axial loads.

To select the housing, verify the shaft diameter, load type and environmental conditions. The insert sealing defines protection against dust and humidity: in environments with particles, a configuration with reinforced seal is advisable. Internal clearance and lubrication must be factory settings; mixing greases of different bases is not recommended. During mounting, align the flange with the holes and tighten the bolts in a cross pattern to avoid deformation of the housing.

Equivalences between brands of mounted housings are established by shaft diameter, number of holes and insert type, not by the commercial code. A 4-bolt flange housing with ball insert from one brand can be replaced by another with similar dimensional characteristics, provided the hole spacing and center height match. MR Accesorios Industriales will indicate the compatible alternative if the original code is not available.

If you need a Y-bearing insert housing for your equipment, send the code or model via WhatsApp to MR Accesorios Industriales. We will quote promptly and, if applicable, indicate the compatible alternative or manufacture it to measure. We also advise on mounting, lubrication and sealing so that the housing works under the right conditions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.