Flange bearing 4 holes DODGE F4B-SC-015

DODGE F4B-SC-015 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SC-015 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC series Y-bearing with insert bearing is a 4-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. It is used in equipment where alignment and sealing are critical, such as conveyor belts, mixers and industrial fans. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct configuration for your application.

The SC series designation is read in blocks: the letter F indicates a flange housing, the number that follows (4, 2, etc.) defines the number of mounting holes, and B indicates the type of split or split-type housing. The SC suffix identifies the insert bearing series with set screw locking. In the examples F4B-SC-008, F4B-SC-010 and F4B-SC-100, the last number is the shaft diameter code, which is not a direct metric measurement but an internal reference that correlates with the nominal diameter in inches. To select, always start from the actual shaft diameter and then verify the equivalent code.

These housings are used in the food, cement, paper and aggregate processing industries, where shafts require rigid support and protection against dust and moisture. In Argentina they are common in belt conveyors, bucket elevators, vibrating screens and packaging machines. The 4-bolt flange allows firm mounting on sheet metal or profile structures, and the insert bearing accommodates slight angular misalignment, which simplifies installation in equipment with manufacturing tolerances.

To choose correctly, consider the sealing: the SC series usually incorporates labyrinth or contact seals that retain grease and block contaminants. Check the internal clearance and the type of lubrication, as some inserts come pre-lubricated from the factory. During mounting, ensure the flange sits flat and that the bolts are tightened in a cross pattern with uniform torque. Shaft alignment with the housing must be careful; although the insert tolerates small deviations, a large error shortens service life.

Regarding equivalences, 4-bolt flange Y-bearings from different brands share standardized dimensions, but shaft diameter codes and locking systems may vary. Do not assume that a similar code from another brand is interchangeable: always compare the shaft diameter, the distance between holes and the type of insert. MR Accesorios Industriales advises you to find the alternative compatible with your equipment, without compromising performance.

If you have the part number of the housing you need, such as F4B-SC-012 or F4B-SC-015, send it by WhatsApp to MR Accesorios Industriales. We will quote you promptly and, if you are looking for a variant you do not see, write to us with the model or the measurements of your shaft. More than 80 years of experience in industrial distribution back every response.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.