Flange bearing 4 holes DODGE F4B-PSEZ-20M-P

DODGE F4B-PSEZ-20M-P is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-PSEZ-20M-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE PSEZ series flanged Y-bearing unit is a four-bolt mounted unit that combines a cast iron housing with an insert ball bearing. It is used to support rotating shafts on flat structures, where firm fastening and simple alignment are required. MR Accesorios Industriales supplies this line as an official brand, with alternatives for different shaft sizes.

The PSEZ series designation is read in blocks. The first letters and numbers indicate the housing type and the number of mounting holes; the code F4B corresponds to a four-bolt flange. Then PSEZ appears, which identifies the insert series and the sealing style. The number that follows —20, 25, 30, 35, 40 or 50 in the examples— indicates the shaft size. The suffix M refers to the metric system and the final P to a housing variant. Thus, F4B-PSEZ-30M-P is a four-bolt flange housing for a 30 mm shaft.

These housings are seen in belt conveyors, screens, bucket elevators, mixers and packaging lines. Also in equipment for food, chemical, cement and aggregate processing, where the environment has moderate dust or humidity. In Argentina you will find them in animal feed plants, meatpacking plants, tanneries and quarries, provided the structure allows mounting a flat flange with four bolts and the shaft remains perpendicular to the support face.

To choose correctly, first look at the shaft diameter and the load type: the PSEZ series covers applications with predominantly radial load and some axial load. Check the sealing: inserts with a lip seal and metal flinger perform better with fine dust or splashes. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns without effort. Lubricate the insert according to the duty cycle and check the axial clearance before start-up.

Interchangeability between brands of Y-bearing insert units depends on the center height, the shaft diameter, the distance between holes and the type of locking of the insert to the shaft. Two housings from different brands may share flange dimensions and not be equivalent if the locking system changes. That is why it is advisable to compare drawing against drawing. If you need to replace existing equipment, send us the original part number and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line as an official brand and adds more than 80 years of experience in industrial distribution. If you have the part number of the housing you are looking for, send it on WhatsApp and we will quote it promptly. We can also advise you on the sealing variant or the type of insert that best suits your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.