Flange bearing 4 holes DODGE F4B-GTM-200

DODGE F4B-GTM-200 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-GTM-200 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange Y-bearing with insert bearing is an assembled unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated from the factory. It is mounted on sheet metal or structure with four bolts and supports rotating shafts in equipment where rigid and easily replaceable fastening is required. The DODGE GT series covers light and medium transmission applications in plants and workshops.

The designation of these pillow blocks is read in blocks. The initial letters indicate the housing type: F corresponds to the 4-bolt flange, and the number that follows defines the size or the number of mounting holes. Then comes the series, GT or GTM, which groups the shaft diameter and the insert type. The final three-digit section identifies the shaft size: that is why F4B-GTM-012, F4B-GTM-100 and F4B-GTM-115 are the same housing format with different diameters. With that part number you order the exact replacement.

These pillow blocks are used in belt and roller conveyors, bucket elevators, mixers, blowers, packaging belts and process lines. In Argentina they appear a lot in food plants, meatpacking plants, mills, quarries and aggregate processing facilities, where the environment has dust, humidity or frequent washing. The 4-bolt flange allows fastening the unit on a flat face and removing it without disassembling the entire shaft, something valued in maintenance when a unit must be replaced quickly.

To choose well, look at the diameter and the insert fastening type: there are ones with set screw, with eccentric ring or with collar, and each one accepts a different level of load and misalignment. Also check the sealing, because units with contact seal or labyrinth last longer in environments with water or particles. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and verify that the shaft turns freely. Lubricate according to the duty cycle and check alignment to avoid loading the insert.

DODGE is a brand that MR Accesorios Industriales carries, and its insert pillow blocks cross with equivalent lines from other manufacturers: same shaft diameter, same distance between holes and same fastening type are usually interchangeable between brands. The key is to compare the complete part number and the housing dimensions, not just the diameter. If the equipment comes with another brand, the compatible unit can be found while keeping the mounting arrangement and the seal type.

If you have the pillow block part number at hand, send it via WhatsApp to MR Accesorios Industriales along with a photo of the housing and the shaft size. With that we will quote the unit and, if necessary, indicate the compatible alternative from the GT or GTM series. We can also review the complete equipment assembly so that the replacement fits without modifications.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.