Flange bearing 4 holes DODGE F4B-GTEZ-108-PCR

DODGE F4B-GTEZ-108-PCR is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-GTEZ-108-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE ER-Series 4-bolt flange Y-bearing housing with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated at the factory. It is used to support rotating shafts in equipment that requires flat, rigid mounting, with the possibility of mounting and dismounting without dismantling the machine. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The designation of these housings is read in blocks. The letter F indicates a 4-bolt flange; the number that follows, the housing size. GTEZ identifies the housing family and the insert it houses, and PCR indicates the bearing sealing type. That is why F4B-GTEZ-04-PCR, F4B-GTEZ-05-PCR and F4B-GTEZ-06-PCR share the same format and change the shaft diameter: the higher the number, the larger the size. The suffixes are not decorative: they define the sealing and the internal clearance with which the unit is supplied.

In Argentine industry these housings appear in belt conveyors, packaging lines, mixers, screens, extractors and process lines in food, chemical and aggregate plants. The 4-bolt flange allows them to be mounted on sheet metal or a flat structure, with the shaft passing through or at the end. Being mounted units, they simplify maintenance: the complete unit is replaced and put back into service without re-machining the seat.

To choose well, take into account the shaft diameter, the radial and axial load of the equipment, and the environment where it works. In areas with dust or water, the PCR sealing is advisable, as it protects the raceway and retains the lubricant. Check the flange alignment before tightening the bolts, and grease according to the duty cycle. Forced or misaligned mounting shortens the insert life more than any other factor.

Mounted units are interchanged between brands by shaft number and housing type, not by full part number. If the equipment carries another brand, compare shaft diameter, bolt hole spacing and center height; with that data the equivalence is defined. At MR Accesorios Industriales we indicate the compatible alternative and, if necessary, manufacture it to measure. Send us the part number or model on WhatsApp and we will quote promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.