Flange bearing 4 holes DODGE F4B-GTAH-40M

DODGE F4B-GTAH-40M is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-GTAH-40M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bracket with insert bearing from the DODGE GTAH series is a mounted assembly that combines a cast iron housing with an insert ball bearing, ready to fasten to a flat surface with four bolts. It is used to guide and support rotating shafts in equipment requiring rigid fastening and precise alignment, such as conveyor belts, agitators, pumps and fans. MR Accesorios Industriales supplies this line as an official brand.

The GTAH series designation is read in blocks. The prefix F4B indicates a 4-bolt flange bracket; it is followed by the code GTAH, which identifies the housing family with insert bearing; and the numeric suffix with the final letter M, as in F4B-GTAH-17M or F4B-GTAH-40M, indicates the shaft diameter for which the insert is machined. The series examples range from F4B-GTAH-17M to F4B-GTAH-50M, which gives an idea of the available sizes. To choose the correct part number, the key data is the shaft diameter where it is mounted.

In Argentine industry, these brackets appear in belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps and process equipment in food, chemical and aggregate treatment plants. The 4-bolt flange allows firm fastening on sheet metal or cast structures, with the possibility of adjusting the shaft position before tightening the bolts. It is a common solution when a robust, low-maintenance support is needed in environments with moderate dust or moisture.

To select the bracket, verify the shaft diameter, the mounting type and the working conditions. The GTAH series insert usually comes with sealing that retains lubricant and blocks the entry of contaminants; if the equipment operates with frequent washdowns or heavy dirt, it is advisable to check the seal type. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify shaft alignment with the other support. Lubrication and internal clearance are already set at the factory, but it is good practice to check that the insert turns freely before start-up.

When looking for a replacement, bear in mind that different manufacturers use their own nomenclatures for equivalent shaft sizes. The DODGE GTAH series can be interchanged with other 4-bolt flange bracket lines, but the shaft diameter, hole spacing and center height must be compared. If you cannot find the exact equivalent, write to us on WhatsApp with the part number or the dimensions of the original bracket and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line and can advise you to choose the right bracket. Send us by WhatsApp the part number on the equipment or the shaft and flange dimensions, and we will quote you promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.