Flange bearing 4 holes DODGE F4B-GTAH-110L

DODGE F4B-GTAH-110L is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-GTAH-110L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTAH Y-bearing unit is a 4-bolt flange mounted bearing: a unit that combines an insert bearing with a flange housing, ready to be fastened to a flat surface. It is used to support drive shafts in equipment where firm fastening and simple alignment are required, and it allows the assembly to be mounted and removed without reworking the base. MR Accesorios Industriales supplies it in Buenos Aires, Argentina.

The GTAH series designation is read in blocks. The initial letters indicate the unit type: flange housing with insert bearing. The final numeric section identifies the shaft diameter for which the unit is made, and the letter that accompanies it defines the locking system of the insert on the shaft. Thus, a reference such as F4B-GTAH-110L corresponds to a 4-bolt flange unit of the GTAH series with a given shaft diameter. If you have doubts about how to read your part number, send us the complete reference and we will indicate the equivalent.

These units appear in belt conveyors, packaging belts, mixers, blowers, centrifugal pumps and process lines in food, chemical and aggregate processing plants. In Argentina they are found in milling equipment, screens and bucket elevators, where the 4-bolt flange allows the unit to be fastened to a plate or frame with four bolts. They are also used in fans and in low and medium speed drive shafts that need rigid, repeatable mounting support.

To choose correctly, first confirm the shaft diameter and the insert locking type: GTAH series units can come with set screws or with an eccentric collar, and that defines how the bearing locks to the shaft. Also check the sealing: in dusty or humid environments, an insert with contact seals is advisable and, if washing is involved, with additional protection. During mounting, rest the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check alignment before starting the equipment. Lubrication is done through the insert channel, with the grease indicated for the operating temperature.

Flange mounted units are interchanged between manufacturers by shaft number, number of holes and distance between mounting centers, not by the complete part number. A reference from another brand with the same shaft diameter and the same flange may work, but the insert locking type, the sealing and the center height must be compared. If space is tight or the original equipment is no longer available, at MR Accesorios Industriales we will indicate the compatible alternative or manufacture it to measure.

To request a quote for your DODGE GTAH Y-bearing unit, send us by WhatsApp the complete part number shown on the housing or on the equipment plate, for example F4B-GTAH-110L, together with the shaft diameter if you have it at hand. With that data we will send you the quote and confirm the variant that best suits your application. If you are looking for another size or a different seal, write to us anyway: we will indicate the available option.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.