DODGE F4B-DL-20M-NL flange bearing 4 holes

DODGE F4B-DL-20M-NL is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-DL-20M-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange bracket with D-Lok insert bearing from DODGE is a mounted unit that combines an insert ball bearing with a four-bolt flange. It is used to support rotating shafts in applications where the flange is fastened to a surface perpendicular to the shaft, such as machine walls or frames. The D-Lok series stands out for its shaft locking system, which simplifies assembly and disassembly in the plant.

The D-Lok series designation is read in blocks. In the codes of this series, F4B indicates a 4-bolt flange, DL corresponds to the D-Lok series, the middle number is the nominal shaft diameter in millimeters, and NL indicates that the insert does not have additional lifetime lubrication. The codes in the series follow the same logic: the middle number identifies the shaft size. This nomenclature lets you order the bracket by code without ambiguity.

In Argentine industry, these brackets appear in belt conveyors, mixers, blowers, centrifugal pumps and process equipment. They are also found in food, chemical and aggregate processing plants, where the 4-bolt flange makes anchoring to metal structures easier. Because it is an insert bearing, it accommodates minor misalignment and combined loads, which makes it versatile for drive shafts under demanding working conditions.

To select the bracket, check the shaft diameter and the type of locking the equipment requires. The D-Lok series uses a locking system that does not require set screws on the shaft, which reduces the risk of marking the surface. During assembly, make sure the flange sits flat and that the anchor bolts are tightened evenly. Lubrication of the insert must follow the manufacturer's recommendations for each application and environmental condition.

DODGE brackets are interchangeable with other brands of 4-bolt flange mounted bearings, as long as the flange dimensions, shaft diameter and locking system match. When requesting a quote, provide the full code or the critical dimensions so that MR Accesorios Industriales can offer you the compatible alternative. Interchangeability between brands is possible, but it is advisable to verify tolerances and load capacity before replacing a component.

If you need a flange bracket with insert bearing for your equipment, write to us on WhatsApp with the code or model you are looking for. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if needed. We can also advise you on proper assembly and lubrication for your application.