DODGE F4B-DL-110L-NL flange bearing 4 holes

DODGE F4B-DL-110L-NL is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-DL-110L-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Y-bearing bracket with DODGE D-Lok series insert bearing is a 4-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. The flange is bolted down and the insert, with its locking system, is mounted on the shaft. It is used in equipment where radial loads and some axial thrust must be supported with simple mounting and direct alignment. MR Accesorios Industriales sells this line.

The D-Lok series designation is read in blocks. In F4B-DL-110L-NL, the first part indicates the bracket type: 4-bolt flange. The DL block corresponds to the D-Lok series, with its own locking system. The central number, such as 110, refers to the shaft diameter according to the series table. The suffixes L and NL indicate configuration and sealing variants. To order the correct part number, provide the complete designation exactly as it appears on the equipment.

These brackets appear in conveyors, mixers, fans, pumps and process lines. In Argentina they are seen in food, chemical, cement and agricultural plants, where the flange mounting solves fastening onto sheet metal or angle iron. The 4-bolt flange distributes the load and allows the shaft position to be corrected with some clearance before final tightening. It is a common solution when the bracket is mounted on a flat face and the shaft is perpendicular to that surface.

To select, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal defines the protection against dust, water or frequent washdowns. Proper lubrication and the bearing internal clearance influence service life. During mounting, check that the flange seats without deforming and that the shaft enters without blows. Alignment between brackets prevents parasitic loads. If the equipment runs with vibration, periodically check the tightening of the flange bolts.

Flange mounted bearings are available in different brands with equivalent locking systems. Interchangeability is not automatic: insert tolerances, seal type and hole arrangement vary. That is why it is advisable to compare the complete designation and the critical dimensions before replacing. The compatible alternative within the same family is sought. MR Accesorios Industriales tells you the option that best suits your equipment.

If you need a Y-bearing bracket with DODGE D-Lok series insert bearing, send the part number via WhatsApp to MR Accesorios Industriales. With the complete designation or a photo of the part, we will quote you promptly. We can also advise you if you are looking for a different sealing or locking variant within the line.