DODGE F4B-DL-104S-NL flange bearing 4 holes

DODGE F4B-DL-104S-NL is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for F4B-DL-104S-NL via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange housing with insert bearing of the D-Lok series is a mounted unit that combines a cast iron housing with an insert ball bearing and an eccentric locking system. It is used to support rotating shafts on flat structures, with the particular feature that the bearing can be oriented and locked onto the shaft without machining the housing. It is a common solution in transmission equipment where a simple, removable mounting is sought.

The designation of these housings is read in blocks. The initial letter and the number that follows indicate the housing type and the number of mounting holes: F stands for flange and 4 for four holes. Then comes the code of the locking series, in this case D-Lok, which defines the insert locking system on the shaft. The three-digit number that follows, as in F4B-DL-104S-NL, identifies the bearing size and shaft diameter. The final suffixes indicate sealing, housing material or unit configuration variants.

In Argentine industry these housings appear in belt conveyors, bucket elevators, mixers, screens and packaging lines. They are also found in water treatment equipment, food plants and industrial ventilation systems. The flange housing allows the unit to be fastened against a flat face of sheet metal or structure, which simplifies assembly and replacement in equipment where side access is limited. MR Accesorios Industriales sells this line for production plants, maintenance workshops and machinery manufacturers.

To select the correct housing, start from the shaft diameter and the type of load: radial, axial or combined. The D-Lok series is distinguished by its eccentric locking system, which facilitates mounting and removal without special tools. It is important to check the alignment of the mounting face and the condition of the shaft surface, because eccentric locking requires a clean fit without burrs. Insert lubrication and seal condition determine service life in environments with dust, moisture or frequent washdowns.

Interchangeability between brands of mounted housings is assessed by mounting dimensions, shaft diameter and locking type. A 4-bolt flange housing from one brand can be replaced by another with similar dimensions, but the hole spacing, flange diameter and shaft centre height must be compared. The D-Lok system has equivalents in other insert bearing lines, although the locking mechanism may vary. It is advisable to request a quote with the full part number to ensure dimensional compatibility.

If you need to replace a flange housing with insert bearing, send the part number shown on the part or the equipment model by WhatsApp to MR Accesorios Industriales. We will quote you the equivalent DODGE reference and, if necessary, tell you the compatible alternative within the mounted housing line. We support workshops and plants in selecting the right unit for each application.