Product page
Flange bearing 3 holes DODGE F3B-SLX-104S
- Manufacturer Part Number
- F3B-SLX-104S
- Brand
- DODGEOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SLX
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F3B-SLX-104S is a flange bearing 3 holes reference, within Bearing housings. Request a quote for F3B-SLX-104S via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DODGE SLX series Y-bearing insert unit is a 3-bolt flange mounted assembly that combines an insert bearing with a cast housing. It is used to support rotating shafts in equipment where firm mounting and simple alignment are required. MR Accesorios Industriales supplies this line as an official brand and advises you to choose the right configuration for your application.
The SLX series designation is read in blocks: the initial letter indicates the mounting type, the central number the shaft diameter and the suffix S distinguishes the sealing variant. For example, F3B-SLX-104S corresponds to a 3-bolt flange housing for a 1 1/4 inch shaft. The complete part number lets you identify the exact configuration without ambiguity.
These housings are used in conveyors, belts, elevators, mixers and process equipment in food, chemical and materials plants. In Argentina they are common in packaging lines, mills and aggregate processing plants, where the environment may be humid or dusty. The 3-bolt flange makes mounting on metal structures or masonry easier with a balanced stress distribution.
To select the housing, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. The insert sealing protects against contaminants; in humid environments it is advisable to verify the tightness. Mounting requires aligning the flange with the support surface and tightening the bolts evenly. Lubrication of the insert bearing is permanent in most cases, but it is advisable to check the condition of the sealing and possible relubrication depending on use.
Y-bearing insert units from different brands are usually interchangeable if the flange dimensions, shaft diameter and mounting type match. When requesting a quote, it is advisable to compare the critical measurements: hole spacing, shaft diameter and center height. MR Accesorios Industriales can indicate the compatible alternative if the original part number is not available.
If you need to replace a Y-bearing insert unit, send the complete part number by WhatsApp to MR Accesorios Industriales. We will quote it promptly and, if necessary, offer you an equivalent alternative. We also manufacture split plummer block housings and custom special parts to adapt to your equipment.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Número de producto
- 128150
- Eje o agujero
- 1-1/4 in
Frequently Asked Questions
- What does the designation F3B-SLX-104S mean?
- The F indicates flange, 3B the number of bolts, SLX the insert series and 104 the shaft diameter in inches. The final S indicates the sealing variant. With that part number we can identify the exact configuration you need.
- How do I know if the housing is compatible with my equipment?
- Check the shaft diameter, the hole spacing of the flange and the center height. If you have the original part number, send it by WhatsApp and we will indicate the equivalent or the alternative that best suits you.
- What maintenance does this type of housing require?
- The insert bearing usually comes lubricated for life. Periodically check the sealing and the tightening of the bolts. In dusty or humid environments, check that no contaminant enters and consult us if you need relubrication.