Piloted flange bearing DODGE F2BZ-SXV-115

DODGE F2BZ-SXV-115 is a piloted flange bearing reference, within Bearing housings. Request a quote for F2BZ-SXV-115 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXV series piloted flange Y-bearing housing with insert bearing is an assembled unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed. It is used to support rotating shafts in equipment where a mounting flange with piloted centering is required, which simplifies alignment and anchoring. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SXV series designation is read in blocks. The prefix F indicates the flange configuration; the number that follows —2 in the examples F2BZ-SXV-012 or F2BZ-SXV-104— identifies the number of mounting holes. The letters BZ correspond to the housing type and the suffix SXV defines the insert series. The final numeric segment, such as 012, 014 or 106, indicates the shaft diameter for which the assembly is built. With that data you can locate the exact reference you need.

These housings are seen in belt conveyors, bucket elevators, mixers, blowers and packaging lines. In Argentina they are common in food, cement, tannery and wastewater treatment plants, where a humid or dusty environment demands robust mounting and easy replacement. The piloted flange allows the housing to be fastened to a machined face, which reduces the risk of misalignment and facilitates replacement of the assembly without completely disassembling the shaft.

To choose well, take into account the shaft diameter, the number of flange holes and the type of sealing required by the environment. In areas with water or fine dust, an insert with contact seals is advisable; in applications with moderate temperature, factory lubrication is usually sufficient. When mounting, rest the flange on a clean, flat surface, tighten the screws in a cross pattern and verify that the shaft turns without effort. Careful alignment extends bearing life and prevents vibration.

Interchangeability between brands of piloted flange Y-bearing housings depends on the mounting dimensions: shaft diameter, hole spacing, pilot diameter and center height. Although two references from different manufacturers may share the same shaft diameter, they may differ in the flange. Therefore, it is advisable to compare drawing to drawing. If you cannot find the equivalence, send us the measurements or the original code and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE brand and adds in-house manufacturing of split plummer block housings, ANSI chains and pulleys. If you need to replace a piloted flange Y-bearing housing, write to us via WhatsApp with the F2BZ-SXV code on the plate or with the shaft and flange measurements. We will quote you promptly and help you define the option that best suits your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.