Piloted flange bearing DODGE F2BZ-SC-104

DODGE F2BZ-SC-104 is a piloted flange bearing reference, within Bearing housings. Request a quote for F2BZ-SC-104 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The piloted flange bearing housing with DODGE SC series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a surface perpendicular to the shaft. It is used to guide and support rotating shafts in equipment where a compact front mounting and simple alignment are required. MR Accesorios Industriales distributes this line as an official brand for plants and workshops throughout the country.

The SC series designation is read in blocks: the letter F indicates the flange type, the number that follows defines the nominal shaft diameter in hundredths of an inch or its metric equivalent, and the BZ suffix identifies the housing configuration with piloted flange. For example, F2BZ-SC-012 corresponds to a two-bolt housing for a 12/16 inch shaft, while F2BZ-SC-100 and F2BZ-SC-104 cover larger sizes within the same series. The complete part number allows you to order the exact replacement without ambiguity.

These housings are used in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and industrial fans. In Argentina you will find them in food plants, cement plants, tanneries and agro-industrial facilities, where the piloted flange facilitates mounting on chassis or frames with limited space. The SC series is one of the most widespread for light and medium transmission shafts rotating at moderate speeds.

To select the correct housing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washing it is advisable to verify the seal type. Mounting requires that the flange rests flat and that the shaft is aligned with the bearing to avoid parasitic stresses. Proper lubrication and adjustment without impacts extend the life of the assembly.

DODGE SC series housings are interchangeable with other brands that use the same piloted flange nomenclature and standardized diameters. When requesting a quote, always compare the complete part number and the flange dimensions, since different lines may share the shaft diameter but differ in the distance between holes. If you cannot find the exact reference, MR Accesorios Industriales will indicate the compatible alternative or manufacture it to measure.

To proceed with your inquiry, send via WhatsApp the part number that appears on the equipment plate or on the old housing. With that data we will quote you promptly and advise you on the variant that best suits your application. MR Accesorios Industriales has more than 80 years supporting Argentine industry with power transmission components and bearing housings.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.