Piloted flange bearing DODGE F2BZ-DL-40M

DODGE F2BZ-DL-40M is a piloted flange bearing reference, within Bearing housings. Request a quote for F2BZ-DL-40M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The piloted flange Y-bearing housing with DODGE ER-Series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already lubricated and sealed at the factory. It is used to support rotating shafts in equipment where front mounting with pilot centering is required, and it allows the shaft to be aligned with the structure without machining complex seats. MR Accesorios Industriales sells it in Buenos Aires, Argentina, for plants and workshops throughout the country.

The designation of these housings is read in blocks. The initial letter F indicates the flange housing; the number that follows defines the size or series of the housing; BZ corresponds to the two-bolt piloted flange variant; DL indicates the sealing type or the insert design; and the final number with M identifies the shaft diameter in millimeters. Thus, F2BZ-DL-20M, F2BZ-DL-25M and F2BZ-DL-30M are the same housing for different shaft sizes, and the ER-Series groups the ball inserts that are mounted in these housings.

These housings appear in belt conveyors, bucket elevators, mixers, screens, blowers and packaging lines. In Argentina they are seen in food, cement, chemical and meat processing plants and in the agro-industrial sector, where the environment has dust, humidity or frequent washdowns. The piloted flange makes mounting on sheet metal or cast iron easier with four fastening points and keeps the shaft perpendicular to the mounting face, which is useful when the equipment has little space or when the unit needs to be removed without moving the structure.

To choose correctly, you must look at the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The insert sealing defines how much contamination it tolerates: in environments with water or dust, a design with a reinforced seal is advisable and, if there are washdowns, an additional cover. Lubrication comes from the factory, but in service it should be checked according to running hours and temperature. Mounting requires the flange to rest perfectly flat, tightening the bolts in a cross pattern and checking shaft alignment before start-up.

Housings with insert bearings are interchanged between brands by dimensional equivalence: shaft diameter, distance between holes, pilot diameter and flange height are the data that define whether one unit replaces another. It is not enough for the shaft diameter to match; the housing and the insert must also match. If the original code is not at hand, it can be identified by those dimensions or by the equipment model. MR Accesorios Industriales tells you the compatible alternative within the brands it sells.

If you need to replace a flange housing with insert bearing, send the code on the part or the equipment model via WhatsApp. With that data we will quote the corresponding DODGE ER-Series or tell you the compatible alternative, and we will arrange dispatch to any point in Argentina. You can also ask about other sizes in the same series or about split plummer block housings of in-house manufacturing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.