DODGE F2BZ-DL-106 piloted flange bearing

DODGE F2BZ-DL-106 is a reference of piloted flange bearing, within Bearing housings. Request a quote for F2BZ-DL-106 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE ER-Series piloted flange Y-bearing with insert bearing is an assembled unit that combines a cast housing with an insert ball bearing, ready to mount on a flat face and secure the shaft in power transmission applications. It is used where rigid support, simple alignment and protection of the bearing against dust and moisture are required, in equipment ranging from conveyors to fans and mixers.

The series designation is read in blocks. The initial F identifies the piloted flange housing; the number that follows indicates the housing and insert size; BZ corresponds to the four-bolt flange mounting variant; DL indicates the insert sealing type. The final numeric suffix defines the shaft diameter, which may be expressed in inches or millimeters depending on the code.

These housings appear in belt and roller conveyors, mixers, centrifugal fans, pumps, sorting belts and packaging lines. In the Argentine market they are found in food plants, cement plants, cold storage facilities, tanneries and aggregate facilities, where an environment loaded with dust or moisture demands a support that does not lose performance with continuous use. The piloted flange centers the assembly in the housing and simplifies replacement when the bearing reaches the end of its service life.

To select correctly, look at the shaft diameter, the load type and the environment. The DL sealing of the insert defines the barrier against contaminants: in areas with water or fine dust, it is advisable to verify that the lip and the flinger are in good condition before mounting. The flange rests on a machined face and is secured with the four bolts; poor alignment accelerates insert wear. Lubrication of the insert bearing is done through the channel provided in the housing, with just the right amount so as not to overload the seal.

Cross-brand equivalences are resolved by mounting dimensions: shaft diameter, distance between flange holes, pilot diameter and overall height. A housing from another brand with the same dimensional combination can replace the DODGE ER-Series, but the type of insert-to-shaft fixing must also be compared. MR Accesorios Industriales sells DODGE and can indicate the compatible alternative.

If you have the housing part number at hand, send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also write to us with the shaft diameter, the distance between flange holes and a photo of the mounted assembly: with that data we will indicate the corresponding DODGE ER-Series reference.