Piloted flange bearing DODGE F2BZ-DL-015

DODGE F2BZ-DL-015 is a piloted flange bearing reference, within Bearing housings. Request a quote for F2BZ-DL-015 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE ER-Series piloted flange bearing unit with insert bearing is an assembled unit that combines a cast iron housing with an insert ball bearing, ready to mount on a flat face and secure the shaft in power transmission applications. It is used where rigid support, simple alignment and protection of the bearing against dust and moisture are required, in equipment ranging from conveyors to fans and mixers.

The series designation is read in blocks. The initial F identifies the piloted flange bearing unit; the number that follows indicates the housing and insert size; BZ corresponds to the four-bolt flange mounting variant; DL indicates the insert sealing type. The final numeric suffix defines the shaft diameter: F2BZ-DL-012, F2BZ-DL-014 and F2BZ-DL-015 are inch shaft sizes, while F2BZ-DL-100, F2BZ-DL-102, F2BZ-DL-103, F2BZ-DL-104 and F2BZ-DL-106 correspond to the equivalent metric sizes of the same family.

These bearing units appear in belt and roller conveyors, mixers, centrifugal fans, pumps, sorting belts and packaging lines. In the Argentine market they are found in food, cement, meatpacking, tannery and aggregate facilities, where an environment loaded with dust or moisture demands a support that does not lose performance with continuous use. The piloted flange centers the unit in the housing and simplifies replacement when the bearing reaches the end of its service life.

To select correctly, look at the shaft diameter, load type and environment. The DL sealing of the insert defines the barrier against contaminants: in areas with water or fine dust, verify that the lip and the flinger are in good condition before mounting. The flange rests on a machined face and is secured with the four bolts; poor alignment accelerates insert wear. Lubrication of the insert bearing is done through the channel provided in the housing, with the right amount to avoid overloading the seal.

Interchangeability between brands is resolved by mounting dimensions: shaft diameter, distance between flange holes, pilot diameter and overall height. A bearing unit from another brand with the same dimensional combination can replace the DODGE ER-Series, but the type of insert-to-shaft fixing must also be compared. MR Accesorios Industriales distributes DODGE as an official brand and can indicate the compatible alternative when the original part number is not available.

If you have the bearing unit part number at hand, send it via WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also write to us with the shaft diameter, the distance between flange holes and a photo of the mounted unit: with that data we will indicate the corresponding DODGE ER-Series reference or the compatible alternative.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.