Flange bearing 2 holes DODGE F2BSO-SCFS-104S-SHFS

DODGE F2BSO-SCFS-104S-SHFS is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2BSO-SCFS-104S-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCFS series 2-bolt flange Y-bearing unit is a mounted bearing ready to be fastened to a flat surface with two bolts. It integrates an insert bearing with a spherical outer ring that seats in the housing bore, which allows it to absorb small misalignments typical of mounting. It is used in equipment where the shaft line must be perpendicular to the mounting face, with belt, chain or direct coupling drive.

The SCFS series designation is read in blocks: the letters identify the housing and insert type, and the numbers in the middle indicate the bearing bore size. In the example code F2BSO-SCFS-104S-SHFS, the SCFS segment indicates the 2-bolt flange housing family, while 104S corresponds to the shaft diameter in inches according to Dodge nomenclature. The suffixes that accompany the code — such as SHFS — refer to sealing and insert configuration variants. To choose, send us the complete code that appears on the nameplate or on the original component.

These housings are seen in belt and roller conveyors, bucket elevators, mixers, exhausters, packaging lines and processing lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, screens and bucket elevators, where the 2-bolt flange simplifies anchoring onto sheet metal or profile structures. They also appear in road machinery, centrifugal pumps and industrial fans that operate with horizontal shafts and moderate loads.

To select the housing, start from the shaft diameter and the mounting type the machine accepts. Check the insert sealing: versions with single or double contact lip seal are chosen according to the presence of dust, water or frequent washdowns. The bearing internal clearance and lubrication are already defined by the manufacturer, but it is advisable to check the alignment of the mounting face before tightening the bolts, because a twisted flange accelerates insert wear. Fastening to the shaft is done with the set screws of the inner ring.

As for interchangeability, 2-bolt flange housings with insert bearings from different brands usually share mounting dimensions if the series and shaft diameter match, although the sealing system, fastening thread or housing tolerance may vary. Therefore, before replacing an assembly, compare the complete code and the flange dimensions. If the original code is not available, at MR Accesorios Industriales we will indicate the alternative compatible with your application.

MR Accesorios Industriales sells the DODGE brand and has more than 80 years of experience in Buenos Aires, Argentina, supplying industries throughout the country. If you need this housing or a variant of the SCFS series, send us on WhatsApp the code or model that appears on your equipment and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.