DODGE F2BSO-SCFS-008L-SHFS flange bearing 2 holes

DODGE F2BSO-SCFS-008L-SHFS is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2BSO-SCFS-008L-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCFS series Y-bearing unit with insert bearing is a 2-bolt flange mounted bearing: the housing is fastened with two bolts to a flat surface and the insert rotates on a spherical outer ring, which absorbs small shaft misalignments. It is used to support transmission shafts in equipment where compact, rigid attachment to the structure is required.

The designation is read in blocks. The initial F indicates the flange configuration; the following 2, the number of mounting holes. BSO identifies the housing type, SCFS is the housing series and the L appears before the size number. That final number defines the shaft diameter: in F2BSO-SCFS-008L-SHFS and F2BSO-SCFS-010L-SHFS the shaft size changes, not the flange geometry. The SHFS suffix corresponds to the insert and its sealing.

In Argentine plants they appear in belt and chain conveyors, bucket elevators, mixers, blowers and packaging lines. Also in water treatment equipment, mills and food plants, where the 2-bolt flange allows mounting on folded sheet metal or profile frames. Being a sealed and self-aligning unit, it simplifies maintenance in areas with dust, humidity or frequent washdowns.

To choose correctly, first define the shaft diameter and the distance between flange holes, and verify that the mounting face is flat and clean. The insert has a spherical outer ring: when tightening the bolts, the shaft aligns itself within the permissible clearance. Check the sealing type according to the environment, the factory lubrication and the internal clearance. During assembly, tighten gradually and in a cross pattern, and check that the shaft turns freely before starting the machine.

Among brands, 2-bolt flange housings are interchanged by shaft number and by distance between holes, not by the complete code. Each manufacturer uses its own nomenclature for the housing and the insert, so equivalence is resolved by comparing dimensions and sealing configuration. If the original code does not match, the unit with the same shaft diameter and same mounting arrangement is sought.

To move forward, send by WhatsApp the code that appears on the part or on the drawing, for example F2BSO-SCFS-008L-SHFS, together with the shaft diameter and a photo of the mounting. At MR Accesorios Industriales we quote the DODGE housing and, if you need another variant, we indicate the compatible alternative.