Flange bearing 2 holes DODGE F2B-VSC-008

DODGE F2B-VSC-008 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-VSC-008 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE VSC series 2-bolt flange Y-bearing unit with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to support rotating shafts in equipment where the mounting must be compact and alignment is handled within the housing itself. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The VSC series designation is read in blocks: the letter F indicates the flange housing type, the number that follows defines the number of mounting holes, and the VSC suffix identifies the insert bearing family with its sealing and shaft locking characteristics. Examples F2B-VSC-008, F2B-VSC-010 and F2B-VSC-012 correspond to increasing shaft sizes, while F2B-VSC-100, F2B-VSC-102 and F2B-VSC-103 cover larger diameters within the same series. To request a quote, provide the complete part number exactly as it appears on the equipment.

These units are found in belt conveyors, bucket elevators, mixers, screens and packaging lines. In the Argentine market they appear in food plants, cement plants, cold storage facilities and grain warehouses, where a dust-laden or humid environment demands a robust housing and a well-sealed insert. They are also chosen for agricultural machinery and aggregate processing equipment, because the bearing can be replaced easily without removing the housing from the structure.

To select correctly, take into account the shaft diameter, the insert locking type and the sealing required by the environment. In areas with fine dust or frequent washdown, an insert with contact seals and an additional lip seal is preferable; in applications with slight misalignment, the internal clearance of the insert bearing absorbs small differences. During mounting, seat the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns freely before lubricating. Correct lubrication and careful alignment extend the life of the assembly.

Interchangeability between Y-bearing unit brands is determined by flange dimensions, hole spacing and shaft diameter, not by the commercial part number. A unit from another brand with the same shaft size and the same mounting pattern can replace the original, provided the insert has the same locking and sealing type. If the part number does not match, compare the main dimensions and ask us: we will indicate the compatible alternative within the DODGE line or among the other brands we supply.

If you need to replace a flange Y-bearing unit, send the complete part number from the equipment or the shaft and mounting dimensions via WhatsApp. At MR Accesorios Industriales we will quote the corresponding DODGE VSC series reference and, if needed, indicate the compatible alternative. We handle technical maintenance and repair inquiries in Buenos Aires, Argentina, and respond promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.