DODGE F2B-SXRAG-35M flange bearing 2 holes

DODGE F2B-SXRAG-35M is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SXRAG-35M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXR AG Y-bearing insert unit is a 2-bolt flange mounted bearing, designed to secure rotating shafts to flat structures with simple alignment and quick mounting. It is used in equipment where radial loads and some axial thrust must be supported, with the advantage that the insert is self-aligning and compensates for small misalignments. MR Accesorios Industriales sells this line, with sizes ranging from 20 mm to 55 mm shaft diameter.

The SXR AG series designation is read in blocks: F2B indicates the 2-bolt flange type; SXR identifies the insert bearing series, with sealing and locking features; AG indicates the mounting variant; and the final number, as in F2B-SXRAG-20M or F2B-SXRAG-55M, corresponds to the shaft diameter in millimeters. Thus, the examples in the series cover from 20 mm to 55 mm, always with the same flange geometry and shaft locking system.

These housings are used in conveyors, belts, elevators, mixers, fans and process equipment in food, chemical and materials plants. In Argentina they are common in the oilseed, meatpacking and cement industries, where mounting on sheet metal or profile structures solves shaft supports with few holes and no additional machining. They are also chosen in agricultural machinery and material handling equipment for their resistance to weather and dust.

To select the housing, check the shaft diameter and the type of load: the 2-bolt flange works well with radial loads and moderate axial loads. Check the insert sealing, which must be suitable for the environment (dust, water or washdowns). During mounting, align the flange with the support surface, tighten the mounting bolts and then lock the insert to the shaft according to the series system. Correct lubrication and adequate internal clearance extend bearing life.

Flange mounted bearings have equivalents between manufacturers: different brands offer series with the same hole arrangement and shaft diameters, although suffixes and sealing systems change. To replace an existing housing, the safest approach is to compare the shaft diameter, the distance between flange holes and the type of shaft locking. MR Accesorios Industriales can indicate the compatible alternative within the DODGE line or other brands it sells.

If you need a Y-bearing insert unit for your equipment, send the code or model by WhatsApp to MR Accesorios Industriales. We will quote the exact reference for your application. We also advise on mounting, lubrication and sealing so that the bearing works under the right conditions. MR supplies Argentine industry with quality transmission components and housings.