DODGE F2B-SXR-55M-FF flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SXR
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-SXR-55M-FF is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SXR-55M-FF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE SXR series Y-bearing 2-bolt flange unit is a mounted bearing designed to secure rotating shafts to structures and absorb moderate radial and axial loads. It is used in equipment that requires a compact, self-aligning unit that is easy to mount. MR Accesorios Industriales sells this line for plants, workshops and industrial maintenance in Buenos Aires, Argentina.
The SXR series designation is read in blocks: F indicates the flange configuration, 2B the 2-bolt housing type, SXR the insert series, the number that follows the shaft diameter in millimeters, M the locking type and FF the sealing. For example, F2B-SXR-30M-FF is a 2-bolt flange unit for a 30 mm shaft with an SXR insert, M locking and FF sealing, as with all part numbers in the series. Knowing this logic lets you order the exact part number or the variant you need.
These units are used in conveyors, mixers, fans, pumps, mills and packaging lines, among other continuous process equipment. In Argentina they are common in the food, chemical, cement and aggregate processing industries, where dust and moisture demand robust units with simple maintenance. The 2-bolt flange makes alignment and replacement easier without fully disassembling the shaft.
To select the unit, check the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. The FF sealing protects against dust and splashes, making it suitable for dirty or humid environments, in all part numbers of the series. During mounting, make sure the flange sits flat, align the holes and tighten the bolts in a cross pattern. Lubricate the insert according to the duty cycle and check the axial clearance. Careful alignment extends bearing life and reduces vibration.
Y-bearing units from different brands are often interchangeable if the flange dimensions, shaft diameter and locking type match. When requesting a quote, compare the series, sealing and locking system, not just the part number. MR Accesorios Industriales advises you to find the right equivalent within its power transmission and bearing housing line.
If you need a Y-bearing unit for your equipment, write to us on WhatsApp with the part number or shaft dimensions. At MR Accesorios Industriales we quote the exact reference and support you in the selection. We are in Buenos Aires, Argentina, to meet your bearing and industrial accessory requirements.
Dimensions
- Bore
- 55 mm
Frequently Asked Questions
- How do I identify the part number of the unit I need?
- The part number combines the flange configuration, the insert series, the shaft diameter in millimeters and the sealing type. For example, F2B-SXR-30M-FF corresponds to a 30 mm shaft. If you are not sure, send us the shaft and flange dimensions on WhatsApp and we will help you.
- What does the FF suffix mean in the SXR series?
- The FF suffix indicates the insert sealing type, designed to protect against dust and splashes. It is a common option in demanding industrial environments. If your application requires other protection, ask us and we will indicate the right variant.
- Are DODGE SXR units interchangeable with other brands?
- In many cases yes, as long as the flange dimensions, shaft diameter and locking system match. The part number alone is not enough: you have to compare dimensions and sealing type. Send us your equipment data and we will advise you on choosing the right equivalent.