Flange bearing 2 holes DODGE F2B-SLX-35M

DODGE F2B-SLX-35M is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SLX-35M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SLX series Y-bearing insert unit is a 2-bolt flange mounted bearing, designed to secure rotating shafts to flat structures with simple, robust alignment. It is used in equipment where the bearing must be flanged to a plate or bedplate, with the shaft passing through and the flange bolted down. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with technical advice to choose the correct size.

The SLX series designation is read in blocks: the letter F indicates the 2-bolt flange type, the number that follows — as in F2B-SLX-17M or F2B-SLX-35M — identifies the shaft diameter size, and the suffix M distinguishes the sealing and insert locking variant. The code SLX names the flanged insert bearing family. With this data you can locate the exact reference you need and ask us about the equivalent if you use another nomenclature.

These units are used in belt conveyors, bucket elevators, mixers, blowers, packaging lines and process equipment in food, chemical and materials plants. In Argentina you will find them in the oilseed, meatpacking, cement and aggregate processing industries. The 2-bolt flange allows mounting on folded sheet metal structures or profiles, with the shaft supported in the insert and the housing secured with two bolts.

To select the unit, consider the shaft diameter, the type of load — radial, axial or combined — and the environmental conditions. The insert sealing defines the protection against dust, water or frequent washdowns. The bearing internal clearance and lubrication determine the operating speed and temperature. During mounting, ensure the flange sits flat and the bolts are properly tightened; poor alignment accelerates wear on the insert and the shaft.

DODGE is a reference brand in mounted bearings and MR Accesorios Industriales supplies it in the local market. If you work with another brand, we can guide you on interchangeability: in general, 2-bolt flange units are compared by shaft diameter, bolt hole spacing and center height, but each manufacturer has its own tolerances and locking systems. Send us the code and we will indicate the compatible alternative from the SLX series.

If you need to replace a Y-bearing insert unit, send us the full code on WhatsApp — for example F2B-SLX-20M — and we will quote it promptly. We can also advise you if you have doubts about the size or the sealing type for your application. At MR Accesorios Industriales we work with more than 80 years of experience in industrial distribution so you can find the part your equipment needs.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.