DODGE F2B-SL-30M flange bearing 2 holes

DODGE F2B-SL-30M is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SL-30M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 2-bolt flange Y-bearing unit is an assembled set that combines a cast iron housing with an insert ball bearing, ready to mount on a flat surface. It is used to support rotating shafts in equipment where simple, compact mounting with good alignment capability is required. The DODGE SL series covers general industrial applications and MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The designation of these housings is read in blocks. The letter F indicates the 2-bolt flange; the number that follows, as in F2B-SL-17M or F2B-SL-35M, identifies the size of the unit and the shaft diameter it accommodates. The SL block corresponds to the series, and the final M indicates the sealing and locking variant of the insert. With that data the complete part number is ordered, without ambiguity.

In Argentine industry these housings appear in belt conveyors, chain elevators, mixers, screens and packaging lines. They are also seen in water treatment equipment, feed mills and metalworking shops. The 2-bolt flange allows them to be mounted on folded sheet metal or profile structures, with access to the bolts from the front, which is practical when side space is limited.

To choose well, take into account the radial and axial load of the shaft, the rotation speed and the working environment. The sealing of the insert defines how much contamination it accepts: in areas with dust or water, a more closed protection is advisable. The internal clearance and lubrication are already defined by the manufacturer, so there is no need to regrease on mounting. Check the alignment of the flange before tightening the bolts and avoid striking the insert when fitting it onto the shaft.

As for interchangeability, 2-bolt flange housings with insert bearing are available from several brands under their own nomenclatures. The mounting dimensions —distance between holes, bolt diameter and height to center— are the key data to replace one unit with another. The equivalent is sought by those dimensions and by the shaft diameter. MR Accesorios Industriales tells you the compatible alternative.

If you need a Y-bearing unit with insert bearing from the SL series, send the complete part number by WhatsApp to MR Accesorios Industriales. With the part number that corresponds to your shaft, we will quote you promptly. We can also advise you if the unit will work in a demanding environment or if the shaft has an unusual diameter.