Flange bearing 2 holes DODGE F2B-SCMAH-45M

DODGE F2B-SCMAH-45M is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCMAH-45M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange bearing unit with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated from the factory. It is used to support rotating shafts on flat structures, with front mounting via two bolts. The DODGE SCMAH series covers drive shafts in equipment where firm support, relubrication and simple start-up are required, without machining the housing.

The series designation is read in blocks. The initial F indicates the housing type: 2-bolt flange. The 2B corresponds to the housing size, and SCMAH identifies the insert family and its shaft locking system. The final number, as in F2B-SCMAH-25M or F2B-SCMAH-55M, indicates the shaft diameter for which the unit is assembled. The final M distinguishes the sealing and insert configuration variant. With these details the complete unit is identified without ambiguity.

These bearing units appear in belt and roller conveyors, bucket elevators, mixers, screens, fans and packaging lines. In Argentina they are seen in food, cement, ceramic, meatpacking and agricultural plants, both in new equipment and in replacement of machines that have been working for years. The 2-bolt flange solves the mounting when the support face is small or when the shaft runs close to a wall or frame.

To choose correctly, start from the shaft diameter and the type of load: predominantly radial in most conveyors, with some axial depending on the screw or tensioner. Check the sealing: in dusty, wet or washdown environments, the variant with reinforced seal is advisable. When mounting, rest the flange on a flat, clean surface, tighten the bolts in a cross pattern and verify shaft alignment before tightening. The insert is relubricated according to the duty cycle, without exceeding the quantity.

Between brands, interchangeability is defined by the shaft diameter, the distance between holes, their diameter and the shaft center height. A bearing unit from another brand with those same dimensions can replace the original, even if the sealing or locking system differs. If space is critical, it is advisable to also compare the housing contour. For that, send us the old part number or the dimensions taken on the equipment and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the DODGE line and also manufactures split plummer block housings, ANSI roller chains and pulleys in Buenos Aires, Argentina. If you need to replace a 2-bolt flange bearing unit, write to us on WhatsApp with the F2B-SCMAH part number and the shaft diameter: we will quote it promptly and, if necessary, indicate the option that best suits your machine.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.