Flange bearing 2 holes DODGE F2B-SCM-35M-NL

DODGE F2B-SCM-35M-NL is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCM-35M-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCM series housing is a 2-bolt flange mounted bearing that combines a ball insert with a cast iron housing to fix rotating shafts to flat structures. It is used when the shaft must be perpendicular to the mounting plane and the load is mainly radial. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SCM series designation reads in blocks. The prefix F2B indicates a 2-bolt flange housing; SCM identifies the housing family and the insert type; the number that follows —25, 30, 35, 40, 45, 50 or 55— corresponds to the nominal shaft diameter in millimeters. The suffix M indicates the insert with set screws for shaft locking, and NL indicates that the housing is supplied without lubricant. Thus, an F2B-SCM-40M-NL is a 2-bolt flange housing for a 40 mm shaft, with an insert locked by set screws and without initial grease.

These housings appear in belt conveyors, bucket elevators, mixers, screens and packaging lines. In Argentina they are found in food plants, cement plants, cold storage facilities, tanneries and mining operations, where flange mounting simplifies alignment and allows the assembly to be removed without moving the structure. The cast iron housing resists dust and moisture, and the ball insert absorbs minor misalignments typical of long shafts or shafts supported at several points.

To select the housing, check the shaft diameter and the flange hole pattern. The set screw insert requires a ground shaft with a tight tolerance; if the shaft shows wear, it is advisable to evaluate an insert with an adapter sleeve. Lubrication is defined by the environment: in humid areas or with frequent washdowns, choose seals with greater tightness and a compatible base grease. During mounting, align the flange with the shaft before tightening the bolts and check that the insert rotates without axial play.

DODGE is a reference brand in mounted bearings, and its series often have dimensional equivalents with lines from other manufacturers. Interchangeability does not depend only on the shaft diameter: you must compare the flange diameter, the distance between holes, the center height and the insert locking type. If the original part number is not available, it can be replaced by an equivalent reference as long as those dimensions match. MR Accesorios Industriales indicates the compatible alternative.

If you need a 2-bolt flange housing for your application, send the part number or model via WhatsApp. We will quote you promptly and, if you are looking for a variant you do not see, write to us with the part number you need.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.