DODGE F2B-SCM-115 flange bearing 2 holes

DODGE F2B-SCM-115 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SCM-115 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 2-bolt flange Y-bearing unit with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated from the factory. It is fastened with two bolts to a flat surface and supports the rotating shaft in conveyors, agitators, blowers and process equipment. The DODGE SC series is one of the classic lines of this type of bearing housing, and MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The designation is read in blocks. The initial letters indicate the housing type: the F corresponds to the 2-bolt flange, and the number after the hyphen is the nominal size of the housing. Then comes the series code, SC or SCM, which identifies the housing and insert bearing family. Thus, the sample codes are the same flange format in different sizes. The final numeric suffix defines the shaft diameter that each unit takes.

These bearing housings are used where a shaft needs to be supported with little space and simple fastening. They appear in belt and chain conveyors, mixers, exhaust fans, centrifugal pumps, screens and packaging lines. In the Argentine market they are common in food plants, cement plants, paper mills, meatpacking plants and aggregate processing facilities, where the environment has dust, humidity or frequent washdowns. The 2-bolt flange allows mounting on folded sheet metal or profile structures, with the machined support face.

To choose correctly, start from the shaft diameter and the type of load: the SC and SCM series cover applications with moderate radial load and some axial load. Check the insert sealing according to the environment: in areas with water or fine dust, additional protection is advisable. During mounting, rest the flange on a flat, clean surface, tighten the bolts in a cross pattern and verify that the shaft is aligned with the drive equipment. The insert lubrication comes from the factory; in service, follow the plant's greasing plan and check that the refill hole remains accessible.

Flange mounted units are available in several brands and equivalent lines, and interchangeability is defined by the shaft diameter, the distance between the flange holes and the center height. Two bearing housings with the same nominal size can differ in those points, so it is advisable to compare the equipment data sheet before replacing. If the original bearing housing is no longer available, the compatible alternative is sought by mounting dimensions and load capacity. MR Accesorios Industriales sells DODGE and can guide you in that comparison.

If you already have the bearing housing part number, send it by WhatsApp to MR Accesorios Industriales along with the shaft diameter and a photo of the mounting. With that data we will quote the corresponding DODGE unit or indicate the compatible alternative from the SC and SCM series. If the equipment requires a variant you do not see, write to us anyway with the model and we will solve it.