Flange bearing 2 holes DODGE F2B-SCM-107

DODGE F2B-SCM-107 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCM-107 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange Y-bearing unit is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and lubricated from the factory. It is fastened with two bolts to a flat surface and supports the rotating shaft in conveyors, agitators, blowers and process equipment. The DODGE SC series is one of the classic lines of this type of housing, and MR Accesorios Industriales supplies it in Buenos Aires, Argentina.

The designation is read in blocks. The initial letters indicate the housing type: the F corresponds to the 2-bolt flange, and the number after the hyphen is the nominal size of the housing. Then comes the series code, SC or SCM, which identifies the housing and insert bearing family. Thus, F2B-SCM-100, F2B-SCM-103 and F2B-SCM-107 are the same flange format in different sizes, and the same applies to F2B-SCM-111, F2B-SCM-112, F2B-SCM-115 and F2B-SCM-200. The final numeric suffix is what defines the shaft diameter that each unit takes.

These housings are used where a shaft needs to be supported with little space and a simple fastening. They appear in belt and chain conveyors, mixers, exhausters, centrifugal pumps, screens and packaging lines. In the Argentine market they are common in food plants, cement plants, paper mills, cold storage facilities and aggregate processing sites, where the environment has dust, humidity or frequent washdowns. The 2-bolt flange allows them to be mounted on folded sheet metal or profile structures, with the machined mounting face.

To choose correctly, start from the shaft diameter and the type of load: the SC and SCM series cover applications with moderate radial load and some axial load. Check the insert sealing according to the environment: in areas with water or fine dust, additional protection is advisable. During mounting, rest the flange on a flat, clean surface, tighten the bolts in a cross pattern and verify that the shaft is aligned with the drive equipment. The insert lubrication comes from the factory; in service, follow the plant's greasing plan and check that the relubrication hole remains accessible.

Flange mounted units are available in several brands and equivalent lines, and interchangeability is defined by the shaft diameter, the distance between the flange bolt holes and the center height. Two housings with the same nominal size can differ in those points, so it is advisable to compare the equipment data sheet before replacing. If the original housing is no longer available, the compatible alternative is sought by mounting dimensions and load capacity. MR Accesorios Industriales supplies DODGE as a brand and can guide you in that comparison.

If you already have the housing part number, send it by WhatsApp to MR Accesorios Industriales along with the shaft diameter and a photo of the mounting. With that data we will quote the corresponding DODGE unit or indicate the compatible alternative from the SC and SCM series. If the equipment calls for a variant you do not see, write to us anyway with the model and we will sort it out.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.