Flange bearing 2 holes DODGE F2B-SCFS-008L-SHFS

DODGE F2B-SCFS-008L-SHFS is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCFS-008L-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCFS series 2-bolt flange Y-bearing with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to guide and support rotating shafts in equipment where the mounting must be flush with a wall or frame. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SCFS series designation reads in blocks: F2B identifies the 2-bolt flange assembly, SCFS defines the housing family with insert bearing, and the three-digit number that follows —as in F2B-SCFS-008L-SHFS or F2B-SCFS-010L-SHFS— indicates the nominal shaft diameter in inches. The suffix L indicates the lubricator position, and SHFS corresponds to the insert locking type. Knowing this logic allows you to order the exact code without ambiguity.

These housings are seen in conveyor lines, fans, screens, mixers and process equipment in food, chemical and materials plants. In Argentina they are common in the field, in bucket elevators and screw conveyors, and in the metallurgical industry for low and medium speed shafts. The 2-bolt flange allows them to be mounted on existing sheet metal or structure, with simple alignment and without the need to machine a special housing.

To select well, take into account the shaft diameter, the load type —radial, axial or combined— and the environmental conditions. The insert seal defines protection against dust and humidity: choose the appropriate labyrinth or lip seal according to the environment. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify that the shaft turns without effort. Correct lubrication and careful alignment extend the life of the unit.

Among brands, housings with insert bearings are interchanged by shaft number and flange configuration, but each manufacturer has its own suffixes and tolerances. There is no universal table: always compare the complete code, the shaft diameter and the locking type before replacing. If the original housing has a designation that does not appear, write to us with the model and we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE line and also manufactures split housings, ANSI chains and pulleys. If you need a quote for an SCFS housing or any power transmission component, send the code on WhatsApp and we will reply shortly with the corresponding quote.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.