DODGE F2B-SCEZ-45M-P flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-SCEZ-45M-P is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SCEZ-45M-P via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The 2-bolt flange housing with DODGE SCEZ series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface. It is used to guide shafts in equipment where the mounting must be compact and sturdy. MR Accesorios Industriales sells this line, with alternatives for every shaft size.
The SCEZ series designation is read in blocks: F indicates a 2-bolt flange, B the housing type, SCEZ the insert series and sealing system, and the number that follows corresponds to the shaft diameter in millimeters. The final M indicates the insert locking type and the P the housing material or finish. Thus, F2B-SCEZ-30M-P is a flange housing for a 30 mm shaft with SCEZ insert and housing in the P finish.
These housings are used in belt conveyors, bucket elevators, mixers, fans and process lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, screens and material handling systems where a front mounting with two bolts and simple alignment is needed. The cast iron housing absorbs radial loads and some axial thrust, and the self-aligning insert facilitates mounting on shafts with normal tolerances.
To select the housing, verify the shaft diameter and the bolt hole spacing of the flange. The SCEZ insert comes with sealing that retains grease and blocks dust; if the environment has a lot of moisture or particles, it is advisable to check the condition of the lips and relubricate according to the duty cycle. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify that the shaft turns without effort. Careful alignment extends bearing life and prevents vibration.
DODGE SCEZ series housings are interchangeable with other brands that use the same 2-bolt flange standard and shaft diameter. If you need to replace an existing unit, send us the complete code or the flange and shaft dimensions: we'll indicate the compatible alternative. MR Accesorios Industriales also manufactures split plummer block housings and special parts to adapt non-standard mountings.
To request a quote, write to us on WhatsApp with the product code or the shaft diameter you need. We'll reply shortly with the available option and the technical data so you can confirm the mounting.
Dimensions
- Bore
- 45 mm
Frequently Asked Questions
- What do the M and P mean in the code F2B-SCEZ-30M-P?
- The M indicates the type of locking of the insert to the shaft, generally by means of set screws or eccentric collar depending on the series. The P identifies the housing finish or material. To confirm the exact variant, send us the complete code on WhatsApp.
- Can this housing replace an insert bearing from another brand?
- Yes, if the shaft diameter and the flange bolt hole spacing match. The SCEZ series follows an extended dimensional standard, so it is usually interchangeable with other brands. Send us the dimensions or the code of the old unit and we'll indicate the equivalent.
- How is the SCEZ insert bearing lubricated?
- The insert comes lubricated from the factory and has a relubrication channel. In dusty or humid environments, it is advisable to grease periodically with the equipment stopped. The frequency depends on the working conditions; ask us on WhatsApp if you need guidance.