Flange bearing 2 holes DODGE F2B-SCEZ-35M-P

DODGE F2B-SCEZ-35M-P is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCEZ-35M-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange housing with DODGE SCEZ series insert bearing is a mounted assembly that combines a cast iron housing with an insert ball bearing, ready to fix to a flat surface. It is used to guide shafts in equipment where the mounting must be compact and resistant. MR Accesorios Industriales sells this line as an official brand, with alternatives for each shaft size.

The SCEZ series designation is read in blocks: F indicates 2-bolt flange, B the housing type, SCEZ the insert series and the sealing system, and the number that follows —20, 25, 30, 35, 40, 45 or 50— corresponds to the shaft diameter in millimeters. The final M indicates the insert fixing type and the P the housing material or finish. Thus, F2B-SCEZ-30M-P is a flange housing for a 30 mm shaft with SCEZ insert and housing in the P finish.

These housings are used in belt conveyors, bucket elevators, mixers, fans and process lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, screens and material handling systems where a front fixing with two bolts and simple alignment is needed. The cast iron housing absorbs radial loads and some axial thrust, and the self-centering insert facilitates mounting on shafts with normal tolerances.

To select the housing, verify the shaft diameter and the hole spacing of the flange. The SCEZ insert comes with sealing that retains grease and blocks dust; if the environment has a lot of humidity or particles, it is advisable to check the condition of the lips and relubricate according to the duty cycle. When mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify that the shaft turns without effort. Careful alignment prolongs bearing life and prevents vibrations.

DODGE SCEZ series housings are interchangeable with other brands that use the same 2-bolt flange standard and shaft diameter. If you need to replace an existing assembly, send us the complete code or the flange and shaft dimensions: we will indicate the compatible alternative. MR Accesorios Industriales also manufactures split plummer block housings and special parts to adapt non-standard mountings.

To request a quote, write to us on WhatsApp with the code F2B-SCEZ-XXM-P or with the shaft diameter you need. We will reply shortly with the available option and the technical data so you can confirm the mounting.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.