Flange bearing 2 holes DODGE F2B-SCEZ-104S-P

DODGE F2B-SCEZ-104S-P is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCEZ-104S-P via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ flanged Y-bearing with insert bearing is a two-bolt mounted unit that combines a cast iron housing with a ball insert bearing unit, already aligned and ready to bolt to a structure. It is used to support and guide drive shafts in equipment where rigid fastening to sheet metal or a frame is required, with the advantage that the insert accommodates slight misalignment and rotates on the shaft without additional machining.

The series designation is read in blocks. The letter F indicates the flange housing type; the number that follows indicates the number of mounting holes, as in F2B, which corresponds to two holes. It is followed by the letters SCEZ, which identify the insert family and its sealing configuration, and the final suffix -P defines the mounting variant. The example F2B-SCEZ-104S-P shows the complete order: housing type, insert series, diameter code and finish.

In Argentine industry these housings appear in belt and roller conveyors, packaging lines, mixers, blowers, exhaust fans, milling lines and aggregate processing equipment. They are also found in machines for food, wood and plastics, where the shaft rotates at moderate speeds and the flange is bolted to a side panel or frame. The flange housing allows mounting on flat surfaces with front access, which is practical in compact equipment or equipment with difficult side access.

To choose correctly, take into account the shaft diameter, the type of load and the direction of the forces. The two-bolt flange works well when the load is mainly radial; if there is axial thrust, another configuration should be evaluated. Check the insert sealing according to the environment: dust, water or frequent washdowns require tighter protection. During mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and verify shaft alignment before start-up. Lubricate according to the duty cycle and periodically check clearance and temperature.

Mounted housings are interchangeable between brands based on the combination of shaft diameter, number of holes and distance between mounting centers, not only by the part number. Two references from different manufacturers may share flange dimensions and be compatible, but they differ in sealing, shaft fastening system or housing material. Therefore, when comparing, it is advisable to verify those dimensions and the insert type. MR Accesorios Industriales sells DODGE as an official brand and can indicate the compatible alternative if you need to replace an existing unit.

If you already have the part number stamped on the housing or the plate, send it by WhatsApp to MR Accesorios Industriales along with a photo of the assembly and the shaft measurement. With that we will quote the DODGE SCEZ flanged Y-bearing or the alternative that best suits your equipment, and we will reply promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.