Flange bearing 2 holes DODGE F2B-SCAH-203

DODGE F2B-SCAH-203 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCAH-203 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange bracket with DODGE SCAH series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to guide shafts in equipment where compact, rigid support is required, with simple alignment and reduced maintenance. MR Accesorios Industriales sells this line as an official brand for industrial applications in Buenos Aires, Argentina.

The SCAH series designation is read in blocks: the F2B prefix indicates the 2-bolt flange type, followed by SCAH, which identifies the bracket series. The final three digits indicate the shaft diameter: for example, F2B-SCAH-008 corresponds to a shaft of 8 units and F2B-SCAH-100 to a measurement in hundredths of an inch. The examples F2B-SCAH-010, F2B-SCAH-012, F2B-SCAH-014, F2B-SCAH-015, F2B-SCAH-101 and F2B-SCAH-102 show the range of available sizes. To select, simply indicate the full part number or the required shaft diameter.

These brackets are used in conveyors, belts, elevators, mixers, blowers and process equipment in food, chemical, cement and aggregate processing plants. In Argentina they are common in the meat industry, flour mills, animal feed plants and packaging lines, where the 2-bolt flange allows mounting on sheet metal or structure without the need to machine housings. Their design facilitates quick replacement of the insert bearing when it wears out.

To choose correctly, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washdowns, it is advisable to verify the type of seal. Internal clearance and lubrication are already defined at the factory, but it is important to check the alignment of the flange during assembly to avoid parasitic stresses. Fastening with two bolts must be firm and even.

Regarding equivalents, 2-bolt flange brackets with insert bearings from other brands can be interchanged if the mounting dimensions, shaft diameter and fastening type match. It is not enough for the part number to be similar: the distance between holes, their diameter and the overall height must be compared. If you need to replace existing equipment, send us the original part number or the measurements and we will indicate the compatible alternative from DODGE or another brand we carry.

To request a quote for a DODGE SCAH series bracket, write to us on WhatsApp with the full part number (for example, F2B-SCAH-012) or with the shaft diameter you need. We can also advise you if you are looking for a variant with another type of seal or a special configuration. At MR Accesorios Industriales we respond promptly with the technical information and the corresponding quote.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.