Flange bearing 2 holes DODGE F2B-SC-104-NL

DODGE F2B-SC-104-NL is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SC-104-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange housing with SC series insert bearing from DODGE is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface using two bolts. It is used to guide shafts in equipment where compact and rigid support is required, with simple alignment. MR Accesorios Industriales sells this line as a brand for industrial applications in Argentina.

The SC series designation is read in blocks: the prefix F#B indicates the flange type and the number of holes, where the number replaces the size; SC identifies the insert bearing series; the following number defines the shaft diameter; and the suffix NL indicates a construction variant within the line. For example, F2B-SC-008-NL corresponds to a 2-bolt flange housing with SC insert bearing for a 8/8 inch shaft, while F2B-SC-100-NL and F2B-SC-101-NL cover other shaft sizes within the same family.

These housings are used in conveyors, belts, elevators, mixers, fans and process lines in food, chemical, cement and aggregate treatment plants. In Argentina they are common in material handling equipment and in machines that operate with horizontal shafts and moderate loads. The 2-bolt flange allows mounting on metal structures or masonry with simple alignment and reduced space.

To select the housing, take into account the shaft diameter, the load type and the environmental conditions. The insert seal protects against dust and moisture; in environments with frequent washdowns it is advisable to verify the seal type. Proper lubrication and correct flange alignment extend bearing life. During mounting, tighten the fixing bolts evenly and verify that the shaft rotates without lateral stress.

Flange housings with SC series insert bearings can be interchanged with other brands that use the same mounting standard and shaft diameter. Equivalences are established by flange dimensions, distance between holes and shaft diameter, not by the commercial part number. If you need to replace an existing unit, send us the dimensions or the original part number and we will indicate the compatible alternative.

To request a quote for the housing you need, write to us on WhatsApp with the complete part number, for example F2B-SC-012-NL, or with the shaft and flange dimensions. At MR Accesorios Industriales we advise you to choose the right variant and respond shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.