DODGE F2B-SC-010L flange bearing 2 holes

DODGE F2B-SC-010L is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SC-010L via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 2-bolt flange bearing unit with DODGE SC insert bearing is a mounted assembly ready to bolt to a flat surface. The flange with two mounting holes centers the bearing and transmits loads to the frame. It is used in equipment where the shaft must be perpendicular to the mounting plane, with simple alignment and accessible maintenance. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina.

The SC series designation is read in blocks. In the series part numbers, F2B indicates a 2-bolt flange housing, SC is the insert bearing series and the final number identifies the shaft size according to the code. The suffix L indicates the insert locking configuration. With those three pieces of data —flange type, series and size— you can request the complete part number.

These housings appear in belt and roller conveyors, mixers, fans, centrifugal pumps, screens and packaging lines. In food, chemical and aggregate plants in Argentina they are chosen for the ease of replacing the insert without disassembling the structure. They are also used in water treatment equipment and agricultural machinery, where flange mounting solves spaces with limited access.

To select correctly, first define the shaft diameter and the type of load: radial, axial or combined. Check that the flange has a flat surface and sufficient rigidity to prevent deformation. The SC insert comes lubricated and sealed; if the environment has dust, water or frequent washdowns, it is advisable to evaluate additional seals or covers. During mounting, tighten the flange bolts in a cross pattern and check shaft alignment with the equipment.

Insert bearing housings are interchanged between brands by part number and shaft size, but not all series share the same center height or the same hole diameter. Before replacing an assembly, compare the complete part number and the flange dimensions. The compatible alternative can be indicated by shaft size and locking type.

To request a quote for a DODGE SC series housing, send the part number shown on the part or on the drawing via WhatsApp, for example F2B-SC-010L, together with the shaft size. MR Accesorios Industriales will quote it and, if you need another variant from the line, we will indicate the corresponding option. We can also advise you on mounting and lubricating the assembly.