Flange bearing 2 holes DODGE F2B-GTM-100

DODGE F2B-GTM-100 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-GTM-100 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange Y-bearing bracket with DODGE GTM series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to guide rotating shafts in equipment where the mounting must be compact and alignment is handled by the flange. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The GTM series designation is read in blocks: the letter F indicates the flange housing type, the number that follows —2 in the examples— indicates the number of mounting holes, and B corresponds to the mounting variant. The GTM suffix identifies the insert bearing series with its sealing and shaft-locking characteristics. Codes such as F2B-GTM-012 or F2B-GTM-100 add the shaft size at the end, which in this series is expressed in inches or millimeters depending on the case. To choose, send the complete code.

These brackets are found in belt conveyors, screens, mixers, fans and packaging lines. In the Argentine market they appear in food plants, cement plants, meatpacking plants and metalworking shops, where the two-bolt flange allows mounting on sheet metal or structure without machining. The cast iron housing resists dust and moderate humidity, and the insert accommodates slight misalignments typical of long shafts or structures with vibration.

To select the bracket, first check the shaft diameter and the type of locking the insert accepts: some use set screws and others use an eccentric collar. Check the sealing: series with a contact lip seal are for environments with dust or liquids, while single-seal versions are sufficient for clean indoor areas. During mounting, rest the flange on a flat surface, tighten the bolts in a cross pattern and verify that the shaft turns without effort. Lubricate according to the duty cycle and check axial play.

Insert bearing brackets are available from several brands with their own nomenclatures. Interchangeability is not automatic: shaft diameter, hole spacing, center height and insert locking type must be compared. The DODGE GTM series has equivalents in other lines, but replacement requires verifying those dimensions. If you have the original code, MR Accesorios Industriales will indicate the compatible alternative or manufacture it to measure if it is a split bracket.

If you need a flange bracket for a running piece of equipment, send the complete code by WhatsApp —for example F2B-GTM-103— and we will quote it shortly. You can also ask about other sizes in the GTM series or variants in the bearing bracket family. MR Accesorios Industriales serves from Buenos Aires, Argentina, with more than 80 years in the industrial sector.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.