Flange bearing 2 holes DODGE F2B-GTEZ-104S-SHCR

DODGE F2B-GTEZ-104S-SHCR is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-GTEZ-104S-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTEZ series Y-bearing housing with insert bearing is a two-bolt flange mounted bearing unit: the housing is fastened with two bolts and holds a ball insert that rotates on the shaft. It is used to support transmission shafts in equipment where a compact, self-aligning unit with simple mounting is required, with the flange as the anchoring surface.

The GTEZ series designation is read in blocks: the letter F indicates the flange housing family, the number that follows defines the insert size, and the final suffix describes the fastening type and the sealing of the assembly. An example from the series is F2B-GTEZ-104S-SHCR, where the two-bolt format, the GTEZ series and the insert code can be distinguished. To request a quote, send the complete part number exactly as it appears on the tag or on the drawing.

These housings appear in belt conveyors, screens, bucket elevators, mixers, exhaust fans and packaging lines. In the Argentine market they are found in food plants, cement plants, cold storage facilities, tanneries and aggregate facilities, where environments with dust, humidity or washdown require a mounted unit that withstands the weather and simplifies shaft replacement.

To choose correctly, take into account the shaft diameter, the expected radial and axial load, and the sealing type according to the environment: single contact for clean indoor areas, labyrinth or reinforced seal for dust and water. During mounting, support the flange on a flat, rigid surface, tighten the two bolts in a cross pattern and check shaft alignment before lubricating. The ball insert allows slight misalignment, but do not use it to correct a baseplate error.

Flange mounted units are interchanged between manufacturers by shaft number and housing type, not by catalogue code. When comparing with other brands, check the shaft diameter, the distance between holes, their diameter and the insert-to-shaft fastening system. If the original part number is not available, MR Accesorios Industriales will indicate the alternative compatible with those dimensions.

If you need to replace a GTEZ series Y-bearing housing with insert bearing, send via WhatsApp the part number on the part, a photo of the tag or the shaft and flange dimensions. With that we will quote the unit and, if applicable, the equivalent alternative. MR Accesorios Industriales sells DODGE as an official brand and handles technical inquiries on mounting and replacement.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.