DODGE F2B-GT-010 flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- GT
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-GT-010 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-GT-010 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DODGE GT series 2-bolt flange Y-bearing unit is a mounted bearing with a ball insert, designed to secure rotating shafts to flat structures. It bolts down at two points and allows easy shaft alignment in equipment where the mounting must be compact and sturdy. MR Accesorios Industriales sells this line for plants and workshops throughout Argentina.
The GT series designation is read in blocks: the letter F indicates a 2-bolt flange, the number after the hyphen defines the shaft diameter, and the letters GT identify the series. For example, F2B-GT-05 corresponds to a 5/8" shaft, F2B-GT-06 to 3/4", F2B-GT-07 to 7/8" and F2B-GT-08 to 1". Codes with three digits, such as F2B-GT-008 or F2B-GT-010, follow the same logic and allow you to identify equivalent inch sizes.
These housings are used in belt conveyors, bucket elevators, mixers, fans, centrifugal pumps and packaging lines. In the Argentine market they appear in food plants, cement plants, paper mills and maintenance workshops that need to replace flange-mounted bearings. The GT series is one of the most widespread for light and medium transmission shafts.
To select the housing, take into account the shaft diameter, the type of load and the environmental conditions. The insert's sealing protects against dust and moisture; in environments with frequent washdowns, it is advisable to check the seal type. The insert bearing is lubricated for life at the factory, but in demanding applications it is recommended to check the condition of the lubricant. Aligning the two flange holes is key to avoiding axial loads.
DODGE GT series housings are interchangeable with other brands of 2-bolt flange mounted bearings that follow the same mounting standard. When requesting a quote, provide the full part number and shaft dimensions so we can offer you the compatible alternative. MR Accesorios Industriales sells the DODGE brand and can advise you on interchangeability with other lines.
If you need a flange Y-bearing unit for your equipment, send us the full part number or the model shown on the nameplate via WhatsApp. We will quote you promptly and tell you which option best suits your application.
Dimensions
- Número de producto
- 129302
- Bore
- 5/8 in
Frequently Asked Questions
- What does the F2B-GT designation mean on DODGE housings?
- The F indicates a 2-bolt flange, the number after the hyphen corresponds to the shaft diameter, and GT identifies the insert series. For example, F2B-GT-08 is for a 1-inch shaft.
- How do I choose the right housing for my shaft?
- Measure the shaft diameter and check the distance between the flange holes. Also consider the environment: if there is dust or moisture, choose an insert with reinforced sealing. With that data we will quote you the exact reference.
- Are DODGE GT housings compatible with other brands?
- Yes, 2-bolt flange mounted bearings usually follow common dimensional standards. When requesting a quote, send us the part number and dimensions so we can tell you the compatible alternative.