DODGE F2B-DLMEZ-111-SHCR flange bearing 2 holes

DODGE F2B-DLMEZ-111-SHCR is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-DLMEZ-111-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE DLEZ series two-bolt flange Y-bearing housing with insert bearing is a mounted assembly that combines a cast iron housing with a ball insert bearing, already aligned and lubricated from the factory. It is used to support transmission shafts in equipment where frontal fastening with two anchoring points is required, and it allows the shaft to be mounted and removed quickly. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The DLEZ series designation is read in blocks: the initial letters identify the housing type and the shaft diameter, the suffix DLMEZ indicates the two-bolt flange housing variant, and the middle number corresponds to the nominal shaft diameter. An example from the series is F2B-DLMEZ-111-SHCR*, where F2B indicates the two-bolt flange and 111 the shaft for which it is intended. The final asterisk marks a sealing or finish variant that should be confirmed when requesting a quote.

These housings are seen in belt and screw conveyors, bucket elevators, mixers, blowers and packaging lines. In the Argentine market they appear in food plants, cement plants, cold storage facilities, tanneries and aggregate processing facilities, where the environment has dust, humidity or frequent washdowns. The two-bolt flange simplifies anchoring onto sheet metal or structure and leaves the shaft supported in a fixed position, which is useful when mounting onto welded frames.

To choose correctly, look at the shaft diameter, the insert fastening type (set screw, eccentric or adapter) and the sealing: in environments with water or particles a higher-protection closure is preferable. When mounting, support the flange on a flat surface, tighten the bolts in a cross pattern and check shaft alignment before applying final torque. Lubrication comes from the factory, but in service it is advisable to check the condition of the grease and the axial play according to operating hours.

Between brands, two-bolt flange housings with insert bearing are interchanged by shaft dimensions, distance between holes and flange diameter, not by the manufacturer's code. If the equipment has a DLEZ housing, what matters is respecting those dimensions and the insert fastening type. MR Accesorios Industriales will indicate the compatible alternative when the original part number does not match what you need to replace.

To move forward, send us via WhatsApp the part number on the housing or on the equipment plate, for example F2B-DLMEZ-111-SHCR*, together with the shaft diameter. With that we will quote the DODGE housing or the alternative that best suits your mounting, and we will reply promptly.